FEM PostPipelineFromResult/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page FEM PostPipelineFromResult and the translation is 36% complete.
Outdated translations are marked like this.
Other languages:
English • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎русский

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Далее: Warp filter FEM PostFilterWarp.svg Arrow-right.svg

FEM PostPipelineFromResult.svg FEM PostPipelineFromResult

Системное название
FEM PostPipelineFromResult
Расположение в меню
Results → Post pipeline from result
Быстрые клавиши
Представлено в версии
См. также
FEM tutorial

* You need a valid result object in the FEM Analysis.svg Analysis container, such as CalculiX static results.


Конвейер - это результирующий объект, создающий новое графическое представление результатов анализа МКЭ на анализируемой детали. Он добавляет цветовую шкалу и дополнительные параметры отображения.


  • Select the result object
  • Click FEM PostPipelineFromResult.svg button, or click on menu Results and item Post Pipeline from results. A new object called "Pipeline" will be added to your document; note if will appear outside of the Analysis container.
  • Double click the new Pipeline object in the Model tree and select type of properties to display. Typical settings are: Mode: Surface, Field: Von Mises stress


  • Mode: How to draw the results
  • Field: Which result property to draw
  • Vector: If a property is a vector, you might restrict the data to an axis (X, Y, Z) or select Magnitude to use the vector value.
  • If you see no model in the graphical area, go to and enable Edit → Preferences → Display → Rendering → Backlight color
  • If you double-click the scale, you can modify display properties.


  • Gradient: You can select reversed order of the default color gradient or either Black-White or White-Black.
  • Parameter range: Minimum and maximum values are filled-in automatically, when you select a property to evaluate on the Pipeline object; you can modify them, however make sure you know what you are doing. You can also amend number of displayed labels and number of decimal places to be displayed.


Once again, note, that the Pipeline representation of the results (called VTK) on the displayed part is different from the color gradient results which are visible when you finish solution. Values in the gradient scale cannot be applied to the solution result object.

Далее: Warp filter FEM PostFilterWarp.svg Arrow-right.svg