FEM: PostFilterWarp

From FreeCAD Documentation
This page is a translated version of the page FEM PostFilterWarp and the translation is 50% complete.
Outdated translations are marked like this.
Other languages:

FEM PostFilterWarp

Posizione nel menu
Risultati → Wrap vector filter
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Tutorial FEM

Descrizione

Da fare

The result will be the same like with the Displacement slider of the result show dialog with the difference that the displacement is for the Warp filter in the SI unit meter. For example if you use a unit system where the length unit is mm and set a displacement factor of 100 in the result show dialog, you need to set for the Warp filter a factor of 100.000 to get the same result.

A warp filter of the displacement of a beam clamped on one side.

Utilizzo