|Model → Element Geometry → Shell plate thickness|
|Introduced in version|
ElementGeometry2D is used to define thickness of 2D FEM elements, all or laying on the chosen surface.
- There are several ways to invoke the command:
- Define a thickness parameter.
- Optionally press the FEM ElementGeometry2D objects) will be automatically assigned. button in the task panel and then click on the face you want to have a prescribed thickness. If the face selection is free, all remaining faces (whose thickness is not defined by other
- Analysis combining shell elements with solid or edge elements is not supported in the current version (FreeCAD 0.18).
DataThickness: specifies the thickness of the shell.
For viewing results from CalculiX solver on the mesh expanded to the prescribed thickness, property
Beam Shell Result Output 3D in the FEM SolverCalculixCxxtools need to be set to