FEM ConstraintFlowVelocity/ru
Jump to navigation
Jump to search
Outdated translations are marked like this.
Расположение в меню |
---|
Model → Fluid constraints → Constraint flow velocity |
Верстаки |
FEM |
Быстрые клавиши |
Представлено в версии |
- |
См. также |
FEM tutorial |
Contents |
Описание
Устанавливает скорость потока в качестве граничного условия к кромке в 2D или к грани в 3D.
Использование
- Click on
or choose Model → Fluid Constraints →
Constraint flow velocity from the top menu.
- The task panel will display menus for constraint flow velocity
Above: Constraint flow velocity menus within the task panel
- Select the target Edges or Faces.
- Click Add
- Deselect "unspecified" to activate the necessary fields for edition.
- Fill in the values in mm/s for the main Cartesian components.
Notes
- Vector components that are ticked as "unspecified" will be interpolated by the selected solver.
- Any vector that should be the result of the solver must be ticked as "unspecified".
- If the target face or edge is not aligned with the main cartesian coordinate system, it is possible to tick "normal to boundary".
- If "normal to boundary" is ticked, the normal vector to the selected edge or face is X and it will be oriented away from the mesh domain.
- For example, if a flow of 20 mm/s of air must enter the domain, then after ticking "normal to boundary" the user will have to input -20 mm/s in the "velocity X" field.
- For a Wall with non-slip condition, the flow will be (0,0,0)
- For a Symmetry condition, the flow will be (0, Unspecified, Unspecified) if "normal to boundary" is ticked.
FEM
- Материалы: Solid, Fluid, Nonlinear mechanical; Material editor
- Element geometry: Beam (1D), Beam rotation (1D), Shell (2D), Fluid flow (1D)
Ограничения
- Электростатика: Potential
- Жидкости: Initial velocity, Fluid boundary, Flow velocity
- Механика: Fixed, Displacement, Plane rotation, Contact, Transform, Force, Pressure, Self weight, Bearing, Gear, Pulley
- Термические: Initial temperature, Heat flux, Temperature, Heat source
- Сетка: Mesh Netgen, Mesh GMSH, Mesh boundary layer, Mesh region, Mesh group, Nodes set, Mesh to mesh
- Решение: Calculix tools, CalculiX, Elmer, Z88; Уравнения: Heat, Elasticity, Electrostatic, Fluxsolver, Flow; Решатель: Solver control, Solver run
- Результаты: Purge, Show; Постобработка: Apply changes, Pipeline from result, Create warp vector filter, Create scalar clip filter, Create cut filter, Create clip filter, Create data along line filter, Create linearized stresses,
Create data at point filter, Create functions
- Дополнительно: Preferences; FEM Install, FEM Mesh, FEM Solver, FEM CalculiX, FEM Project, FEM Concrete; FEM Element Types
Документация пользователя

- Установка: Windows, Linux, Mac; Начинающим
- Базовая: О FreeCAD, Верстаки, Настройки, Структура документа, Настройка интерфейса, Свойства, Модель мыши; Учебники
- Верстаки: Arch, Draft, FEM, Image, Inspection, Mesh, OpenSCAD, Part, PartDesign, Path, Plot, Points, Raytracing, Reverse Engineering, Robot, Ship, Sketcher, Spreadsheet, Start, Surface workbench, TechDraw, Test Framework, Web
- Скрипты: Введение в Python, Учебник скриптов FreeCAD, Основы скриптов FreeCAD, Установка макросов, Команды графического интерфейса, Единицы Модули: Создание модулей, Создание верстаков, Добавление верстаков Сетки: Сеточные скрипты, Модуль сеток Детали: Модуль Part, Скрипты топологических данных, PythonOCC, Из Mesh в Part Coin scenegraph: The Coin/Inventor scenegraph, Pivy Интерфейс Qt: PySide, Использование графического интерфейса FreeCAD, Создание диалогов Параметрические объекты: Скриптовые объекты Прочее: Кусочки кода, Функции рисования линий, Встраивание FreeCAD, Библиотека векторной математики FreeCAD, Хаб опытных пользователей, Python, Макросы, Основы скриптов FreeCAD, Topological data scripting