FEM: Vincolo di dislocamento

From FreeCAD Documentation
This page is a translated version of the page FEM ConstraintDisplacement and the translation is 16% complete.
Outdated translations are marked like this.

Vincolo di dislocamento

Posizione nel menu
Modello → Vincoli meccanici → Vincolo dislocamento
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Tutorial di FEM

Descrizione

Crea un vincolo FEM per un determinato dislocamento di un oggetto selezionato per un dato grado di libertà.

Utilizzo

  1. Cliccare su o scegliere ModelloVincoli meccanici Vincolo dislocamento dal menu principale.
  2. Selezionare nella vista 3D l'oggetto a cui deve essere applicato il vincolo, che può essere
    1. vertice (angolo)
    2. bordo
    3. faccia
  3. Scegliere un grado di libertà e prescrivere uno spostamento.

Formulas

introduced in version 0.21

General

For the solver Elmer it is possible to define the displacement as a formula. In this case the solver sets the displacement according to the given formula variable.

Take for example the case that we want to perform a transient analysis. For every time step the displacement should be increased by 6 mm:

enter this in the Formula field:
Variable "time"; Real MATC "0.006*tx"

This code has the following syntax:

  • the prefix Variable specifies that the displacement is not a constant but a variable
  • the variable is the current time
  • the displacement values are returned as Real (floating point) values
  • MATC is a prefix for the Elmer solver indicating that the following code is a formula
  • tx is always the name of the variable in MATC formulas, no matter that tx in our case is actually t

Rotations

Elmer only uses the Displacement * fields of the boundary condition. To define rotations, we need a formula.

If for example a face should be rotated according to this condition:

then we need to enter for Displacement x
Variable "time, Coordinate" Real MATC "(cos(tx(0)*pi)-1.0)*tx(1)-sin(tx(0)*pi)*tx(2)

and for Displacement y
Variable "time, Coordinate" Real MATC "(cos(tx(0)*pi)-1.0)*tx(2)+sin(tx(0)*pi)*tx(1)

This code has the following syntax:

  • we have 4 variables, the time and all possible coordinates (x, y z)
  • tx is a vector, tx(0) refers to the first variable, the time, while tx(1) refers to the first coordinate x
  • pi denotes and was added so that after a rotation of 180° is performed

Note

  1. Il vincolo utilizza *BOUNDARY card in CalculiX. Come stabilire un grado di libertà è spiegato in http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node164.html e prescrivere uno dislocamento per un grado di libertà è spiegato in http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node165.html