|Time to complete|
|0.16 or above|
This tutorial was originally written by Drei, and it was rewritten and illustrated by vocx.
This tutorial is meant to introduce the reader to the basic workflow of the Draft Workbench.
The reader will practice:
- creation of lines, arcs, and polygons
- the use of working planes
- the creation of dimensions, text, and shapestrings
- the creation of a technical drawing
This tutorial uses the notation
(x, y, z) to denote the coordinates required to define points in an object. The default unit is millimeters
Final drawing including various Draft objects.
1. Open FreeCAD, create a new empty document with File → New.
- 1.1. Switch to the Draft Workbench from the workbench selector, or the menu View → Workbench → Draft.
- 1.2. Make sure you understand how to use the property editor, particularly the Data and View tabs to change the properties.
- 1.3. Since the Draft objects are planar shapes, they are better viewed from the top. Use 3D view. to set the
- 1.4. Although it is not used in this tutorial, the Draft grid is helpful to position geometrical elements. Use to set both the working plane and the grid, and then show and hide the grid with .
- 2.1. To make sure it is always there, go to the Draft Preferences, Edit → Preferences → Draft → Grid and snapping tab.
- 2.2. Verify that the Show Draft Snap toolbar is active.
You can also change the visibility and properties of the Draft grid in this same window.
Most Draft objects are planar shapes so they are naturally based on a working plane. A working plane can be one of the main XY, XZ, and YZ global coordinate planes, or it can be a plane that is parallel to them with a positive or negative offset, or it can be a plane defined by the face of a solid object.
- 3.1. Press .
Before pressing the button, you can also change the value of the offset in millimeters, as well as the grid spacing, the main lines and snapping radius.
Lines and arcs
4. We will create arcs and lines.
- 4.1. Press .
- 4.2. Set the Center to
(0, 0, 0), and press .
- 4.3. Set the Radius to
30 mm, and press .
- 4.4. Set the Start angle to
60.0°, and press .
- 4.5. Set the Aperture angle to
60.0°, and press .
- 4.6. Repeat the same procedure for a second arc with a radius of
25 mm, the other properties are the same.
5. We will now create a closed profile by tying the arcs with lines.
- 5.1. Press .
- 5.2. In the Snap toolbar make sure is active, and only as well. As you move the pointer to one endpoint of an arc, the Endpoint icon should appear. Click to select this point.
- 5.3. Move the pointer to the closest endpoint of the other arc to tie the two arcs together.
- 5.4. Repeat the process for the other side of the arc to close the profile.
Closed profile created by two arcs and two lines.
Fusing or compounding
We now have several objects in the tree view that form a closed profile. However, this profile is still composed of disconnected objects; each of them can be edited and moved independently of the others. It is possible to continue working with the elements in this way, but it is also possible to fuse them into a single object.
6a. Note that fusing the objects into a single object will create an object that is no longer parametric, so their properties cannot be modified further.
- 6a.1. Select all four objects in the tree view, or by holding and picking them in the 3D view.
- 6a.2. With these objects selected, click on .
- 6a.3. This will upgrade the four objects into a single
6b. If you wish to maintain the parametric nature of the objects you can create a compound instead.
- 6b.1. Switch to the Part Workbench.
- 6b.2. With these objects selected, click on .
Rectangles, circles, and polygons
7. We will draw a rectangular frame.
- 7.1. Press .
- 7.2. Enter the values of the first point
(-100, -60, 0), and press .
- 7.3. Make sure the Relative option is unchecked, as we will use absolute units. You may press in the keyboard to quickly toggle this option on and off.
- 7.4. Enter the values for the second point
(140, 90, 0), and press .
A rectangle is created. Go in the property editor to change its properties. If you don't want the rectangle to create a face, set DataMake Face to
false. If you want to make a face, but see only the wires of that object, keep DataMake Face to
true but set the ViewDisplay Mode to
8. We will draw a circle.
- 8.1. Press .
- 8.2. Enter the values of the center
(0, 0, 0), and press .
- 8.3. Set the radius to
15 mm, and press .
9. We will draw a regular polygon.
- 9.1. Press .
- 9.2. Enter the values of the center
(0, 0, 0), and press .
- 9.3. Set the number of sides to
6, and press .
- 9.4. Set the radius to
50 mm, and press .
Again, you may change the DataMake Face and ViewDisplay Mode properties in the property editor if you want.
The rectangle, the circle, the polygon, and most other objects created with the Draft Workbench share many data and view properties because they are derived from the same base class, Part Part2DObject.
Rectangle, circle and polygon added.
Arrays are used to replicate an object several times in an orthogonal direction (X, Y, Z), around a revolution axis, or along a path.
10. We will create a polar array.
- 10.1. Select the
Wireobject that was previously created with the tool, or the
Compoundcreated with the tool.
- 10.2. Press .
- 10.3. Adjust the polar angle to
- 10.4. Set the number of elements to
- 10.5. Enter the values for the center of rotation
(0, 0, 0), and press .
- 10.2. Press .
- 10.3. Go to the tree view, select the
Arrayobject, and then go to the property editor, and change the DataArray Type from
- 10.4. Change DataNumber Polar to
4, and DataAngle to
The array object shows copies of the object around the origin.
Polar array of the small profile centered around the origin.
Linear dimensions work best when using the appropriate Draft Snap methods to select points and edges to measure. However, they can also be created by specifying absolute coordinates.
11. Create dimensions for the different objects.
- 11.1. Press .
- 11.2. Pick the first point. In this tutorial the first point will always be the origin
(0, 0, 0).
- 11.3. In the Snap toolbar make sure is active, and only as well. As you move the pointer to the top edge of the polygon, the Midpoint icon should appear; click to select this point.
- 11.4. Move the cursor to the right to specify the location of the dimension, then click to set the final position, around
(100, 20, 0). The dimension will automatically show the length value measured between the two points.
- 11.5. Select the dimension object in the tree view, and in the property editor, change ViewFont Size to
6 mm, set ViewExt Lines to
45 mm, and ViewShow Unit to
12. Repeat the process for the two arcs of the closed profile. The first point of the measurement will still be the origin, and the second point will use the Midpoint of the arc.
13. Repeat the process for the circle located in the center. The first point of the measurement will still be the origin. To select the second point make sure Angle icon should appear; click to select this point. Then move the cursor to the right, and click to fix the dimension.is active, and only as well. As you move the pointer to the top of the circle, the
Remember to adjust the ViewFont Size, and other properties to see the dimension correctly.
Dimensions that measure the vertical distance from the origin to the top of the circle, arcs, and polygon.
Texts and ShapeStrings
14. Text objects are simple planar figures that are created in the 3D view but don't have an actual "shape" underneath. This means that they cannot be used in complex operations with shapes like extrusions or boolean operations.
- 14.1. Press .
- 14.2. Select the reference point in the 3D view. In the Snap toolbar make sure is active, and only as well. Move the pointer to the top edge of the highest arc, so that the Midpoint icon appears; click to select this point.
- 14.3. Enter the desired Text, and press once to start a new line; add more lines of text as needed.
- 14.4. When you are ready to finish with edition, press twice.
- 14.5. Select the text object in the tree view, and in the property editor, change ViewFont Size to
6 mm, and ViewJustification to
15. ShapeString objects are shapes made of primitive wires that follow the lines indicated by a certain font. This means that these objects have a real "shape" underneath, and thus can be used in complex operations like extrusions and boolean operations.
- 15.1. Press .
- 15.2. Move the pointer to the desired location in the 3D view above the regular polygon, and click once. This will fix the base point for the ShapeString. The coordinates may be entered manually as well, for example,
(-20, 65, 0).
- 15.3. Enter the desired String, and choose the desired Height.
- 15.4. If there is no default font file, you must click on the ellipsis to open a dialog window to choose the font location in the system.
- 15.5. When a valid font file has been specified, you may proceed to click or press .
Text and ShapeString objects added.
To extrude letters and engrave them on to solids, see the Draft ShapeString tutorial.
Creating technical drawings
If you wish, you may create a technical drawing to display these objects together with additional information like a frame.
Before doing anything, hide the Draft grid by pressing.
16. Switch to the TechDraw Workbench.
- 16.1. Create a standard page by pressing .
- 16.2. In the tree view select all objects created, except for the Page, and then press . Press with the default options; it may take a few seconds to create the view in the page.
- 16.3. Selecting the Page object in the tree view will automatically display the Page in the main window. With the Page selected, go to the property editor, and change DataScale to
- 16.4. Expand the Page object in the tree view to select the ActiveView object. With this view selected, go to the property editor, and change DataScale Type to
- 16.5. Recompute the model by using or pressing .
- 16.6. Hide the frames of the objects by pressing .
TechDraw page with a projection of the shapes created with the Draft Workbench.
TechDraw works best with objects that have a Part TopoShape. Since some objects from Draft, like Draft Texts and Draft Dimensions, don't have such "shapes", some operations of TechDraw don't work with these elements.
Tools like, , and work by receiving an internal SVG image that is generated by internal Draft functions; therefore, TechDraw doesn't have much control about how these views are displayed. More integration of Draft and TechDraw is a work in progress.
The Draft Workbench in many ways is similar to the Sketcher Workbench, as both are intended to produce 2D shapes. The main difference is in the way each workbench handles coordinate systems, and how the objects are positioned. In Draft, objects are freely positioned in the global coordinates system, usually snapping their points to a grid, or to other objects. In Sketcher, a "sketch object" defines a local coordinate system which serves as the reference for all geometrical elements within that sketch. Moreover, the sketch relies on "constraints" to define the final position of its points.
- The Draft Workbench is intended for 2D drawings which are suitable to be drawn on a grid. The Arch Workbench mostly builds on top of the tools defined in the Draft Workbench.
- The Sketcher Workbench is intended for 2D drawings that require precise relationships between its points. It does not rely on a grid, but on rules of positioning (constraints) to determine where the points and edges will be placed. The Sketcher Workbench is mostly used together with the PartDesign Workbench for the creation of solid bodies.
- It is possible to transform a Draft object into a Sketch, and the other way around, using the tool.