Draft WorkingPlane/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Draft WorkingPlane and the translation is 0% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎français • ‎italiano • ‎română • ‎русский

Draft WorkingPlane.png Draft WorkingPlane

Расположение в меню
Черчение → Привязка → К рабочей плоскости
Draft, Arch
Быстрые клавиши
Представлено в версии
См. также


Всегда помещает захваченную точку на текущую рабочую поверхность, даже если захвачена точка вне рабочей плоскости.

This method always places a new point on the current working plane, even if you also use another snapping method and select a point outside of that working plane.

In other words, it projects an external snapping point to the current working plane.


Snapping the second point of a line to one endpoint of an edge of a body, which is then projected on the XY working plane


  1. Make sure the working plane is set with Draft SelectPlane.svg Draft SelectPlane.
  2. Make sure Snap Lock.svg Draft ToggleSnap and Snap WorkingPlane.svg Snap WorkingPlane are turned on.
  3. Optionally turn on any other Draft Snap method.
  4. Choose a Draft tool to draw a shape.
  5. Move the cursor over any line, edge, vertex, or object, like you would do with other snapping methods.
  6. A small white circle will indicate the point on the working plane to which your new point will be attached.
  7. Click to attach your new point.