Draft ToggleContinueMode/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Draft ToggleContinueMode and the translation is 0% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский
Arrow-left.svg Previous: Draft Heal.svg Heal

Draft ToggleContinueMode.svg Draft ToggleContinueMode

Системное название
Draft ToggleContinueMode
Расположение в меню
Черчение -> Утилиты -> Переключить режим продолжения
Draft, Arch
Быстрые клавиши
Представлено в версии
См. также


The Draft ToggleContinueMode.svg Draft ToggleContinueMode command switches continue mode on or off. Many Draft and Arch commands support this mode. If continue mode is on they will restart after finishing. Continue mode can also be toggled in the task panel of those commands so in practice this command is rarely used.


  1. Select the Utilities → Draft ToggleContinueMode.svg Toggle continue mode option from the menu.
  2. Invoke a command that supports continue mode, Draft Line or Arch Wall for example.
  3. To toggle continue mode in the task panel of the command: press T or click the Continue checkbox.
  4. Create your geometry.
  5. Press Esc or the Close button to finish the command and switch off continue mode.

Arrow-left.svg Previous: Draft Heal.svg Heal