Draft ToggleContinueMode

From FreeCAD Documentation
This page is a translated version of the page Draft ToggleContinueMode and the translation is 11% complete.
Outdated translations are marked like this.
THIS COMMAND IS OBSOLETE
It is not available in version 0.22 and above. Use the Continue checkbox in the task panel of commands that support this mode instead.

Draft ToggleContinueMode

Ubicación en el Menú
Draft -> Utilities -> Toggle continue mode
Entornos de trabajo
Draft, Arch
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Description

The Draft ToggleContinueMode command switches continue mode on or off. Many Draft and Arch commands support this mode. If continue mode is on they will restart after finishing. Continue mode can also be toggled in the task panel of those commands so in practice this command is rarely used.

Usage

  1. Select the Utilities → Toggle continue mode option from the menu.
  2. Invoke a command that supports continue mode, Draft Line or Arch Wall for example.
  3. To toggle continue mode in the task panel of the command: press T or click the Continue checkbox.
  4. Create your geometry.
  5. Press Esc or the Close button to finish the command and switch off continue mode.