Draft Snap Perpendicular/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Draft Snap Perpendicular and the translation is 0% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎русский • ‎中文(中国大陆)‎

Draft Snap Perpendicular.svg Draft Perpendicular

Системное название
Draft Snap Perpendicular
Расположение в меню
Черчение → Привязка → Нормаль
Draft, Arch
Быстрые клавиши
Представлено в версии
См. также



This snap option will also find points on the extension of straight edges. Circular edges are always treated as full circles, if a circular edge is an arc the point that is found may not lie on the actual edge.

Draft Snap Perpendicular example.png

Snapping the second point of a line to the perpendicular point on an extended edge


For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.svg Draft Snap Lock.
  2. If Draft Snap Perpendicular is not active do one of the following:
    • Press the Draft Snap Perpendicular.svg button in the Draft Snap toolbar.
    • Press the Draft Snap Lock.svgToolbar flyout arrow.svg button in the Draft snap widget and in the menu select the Draft Snap Perpendicular.svg Snap Perpendicular option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Pick a first point. This snap option requires a previous point. The perpendicular point will be determined in relation to this point.
  6. Move the cursor over an edge.
  7. The edge is highlighted.
  8. If a perpendicular is found the point is marked and the Draft Snap Perpendicular.svg icon is displayed near the cursor.
  9. Click to confirm the point.


See Draft Snap.