Orto

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Draft Snap Ortho and the translation is 33% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎русский
Arrow-left.svg Previous: Draft Snap Near.svg Perto
Next: Grade Draft Snap Grid.svg Arrow-right.svg

Draft Snap Ortho.svg Draft Snap Ortho

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Descrição

The Draft Snap Ortho.svg Draft Snap Ortho option snaps to imaginary lines that cross the previous point at 0°, 45°, 90° and 135°. The lines and angles are relative to the XY plane of the working plane coordinate system.

Draft Snap Ortho example.png

Snapping the second point of a line to an imaginary line that has an angle of 45° with the X axis. The small magenta circles indicate all possible directions.

Utilização

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.svg Draft Snap Lock.
  2. If Draft Snap Ortho is not active do one of the following:
    • Press the Draft Snap Ortho.svg button in the Draft Snap toolbar.
    • Press the Draft Snap Ortho.svg button in the Draft snap widget.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Pick a first point. This snap option requires a previous point.
  6. If you move the cursor around the previous point you will notice a "magnetic" effect when the cursor is on an imaginary infinite line crossing that point at an angle of 0°, 45°, 90° or 135°.
  7. The point is marked and the Draft Snap Ortho.svg icon is displayed near the cursor.
  8. Click to confirm the point.

Preferências

See Draft Snap.


Arrow-left.svg Previous: Draft Snap Near.svg Perto
Next: Grade Draft Snap Grid.svg Arrow-right.svg