Draft Snap Endpoint/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Draft Snap Endpoint and the translation is 0% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский • ‎中文(中国大陆)‎
Arrow-left.svg Previous: Draft Snap Lock.svg Snap Lock

Draft Endpoint.svg Draft Endpoint

Системное название
Draft Endpoint
Расположение в меню
Черчение → Привязка → Конечные точки
Draft, Arch
Быстрые клавиши
Представлено в версии
См. также


The Draft Snap Endpoint.svg Draft Snap Endpoint option snaps to the endpoints of edges. The edges can belong to Draft or Arch objects but also to objects created with other workbenches.

Draft Snap Endpoint example.png

Snapping the second point of a line to the endpoint of an edge


For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.svg Draft Snap Lock.
  2. If Draft Snap Endpoint is not active do one of the following:
    • Press the Draft Snap Endpoint.svg button in the Draft Snap toolbar.
    • Press the Draft Snap Lock.svgToolbar flyout arrow.svg button in the Draft snap widget and in the menu select the Draft Snap Endpoint.svg Snap Endpoint option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over an edge.
  6. The edge is highlighted.
  7. If an endpoint is found the point is marked and the Draft Snap Endpoint.svg icon is displayed near the cursor.
  8. Optionally move the cursor closer to the other endpoint to select that point instead.
  9. Click to confirm the point.


See Draft Snap.

Arrow-left.svg Previous: Draft Snap Lock.svg Snap Lock