Draft Snap Dimensions/ru

From FreeCAD Documentation
This page is a translated version of the page Draft Snap Dimensions and the translation is 0% complete.
Outdated translations are marked like this.

Draft Snap Dimensions

Системное название
Draft Snap Dimensions
Расположение в меню
Черчение→ Привязка → Размеры
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Description

The Draft Snap Dimensions option shows temporary X and Y dimensions. They display the X and Y distance between the cursor and the previous point in the working plane coordinate system. The dimensions are created on the working plane.

Temporary dimensions show the position of the cursor

Usage

For general information about snapping see Draft Snap.

  1. Optionally change the working plane.
  2. Make sure snapping is enabled. See Draft Snap Lock.
  3. If Draft Snap Dimensions is not active do one of the following:
    • Press the button in the Draft snap toolbar.
    • Press the button in the Draft snap widget.
  4. Choose a Draft or Arch command to create your geometry.
  5. Note that you can also change snap options while a command is active.
  6. Pick a first point. This snap option requires a previous point.
  7. As you move the cursor around temporary dimensions are displayed.

Preferences

See Draft Snap.