Draft Shape2DView/es

From FreeCAD Documentation
This page is a translated version of the page Draft Shape2DView and the translation is 14% complete.
Outdated translations are marked like this.

Draft Shape2DView

Ubicación en el Menú
Boceto → Vista de forma 2D
Entornos de trabajo
Boceto, Arquitectura
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Descripción

Esta herramienta coloca en el documento un objeto 2D que es una vista aplanada de un objeto seleccionado Shape, proyectado a lo largo de la dirección de vista actual.

Draft Shape2DView projections can be displayed on a TechDraw Workbench page using the TechDraw DraftView command. Alternatively the TechDraw Workbench offer its own projection commands. But these create projections that are only displayed on the drawing page and not in the 3D view.

Projection of solid shapes onto the XY plane

Utilización

  1. Selecciona el objeto que quieres extraer a una vista 2D
  2. Presiona el botón Vista de forma 2D

How to produce plans and sections with different linewidths

Drawings with different linewidths for viewed and cut lines can easily be produced by using two shape2Dview objects from a same Arch SectionPlane. One of the shape2Dview objects has its projection mode set to Solid, which renders the viewed lines, and another set to Cut lines or Cut faces to render the cut lines. The two shape2Dviews are then placed at the same location, one on top of the other.

Propiedades

See also: Property editor.

A Draft Shape2DView object is derived from a Part Part2DObject and inherits all its properties. It also has the following additional properties:

Data

Draft

  • DatosProjection: La dirección de la proyección
  • DatosProjection Mode: El modo de la proyección: sólido, caras individuales o líneas de corte.

View

Draft

  • VistaPattern (Enumeration): not used.
  • VistaPattern Size (Float): not used.

Scripting

Programación

La herramienta de vista 2D de forma se puede utilizar en macros y desde la consola de Python utilizando la siguiente función:

shape2dview = make_shape2dview(baseobj, projectionVector=None, facenumbers=[])
  • Añade una forma 2D al documento, la cual es una proyección 2D del objeto dado.
  • Se puede indicar un vector de proyección específico.
  • Devuelve el objeto generado.
  • También puedes proporcionar una lista de números de caras a considerar.

Change the ProjectionMode property of the created object if required. It can be: "Solid", "Individual Faces", "Cutlines", "Cutfaces" or "Solid faces".

Ejemplo:

import FreeCAD as App
import Draft

doc = App.newDocument()

box = doc.addObject("Part::Box", "Box")
box.Length = 2300
box.Width = 500
box.Height = 1000

shape1 = Draft.make_shape2dview(box)

shape2 = Draft.make_shape2dview(box, App.Vector(1, -1, 1))

shape3 = Draft.make_shape2dview(box, App.Vector(-1, 1, 1), [0, 5])
shape3.ProjectionMode = "Individual Faces"

doc.recompute()