Draft Drawing/es

From FreeCAD Documentation
This page is a translated version of the page Draft Drawing and the translation is 8% complete.
Outdated translations are marked like this.
THIS COMMAND IS OBSOLETE
Both the command and the Drawing Workbench it works with are not available in version 0.21 and above. Use the TechDraw Workbench and the TechDraw DraftView command instead.

Dibujo

Ubicación en el Menú
Croquis → Dibujo
Entornos de trabajo
Croquis, Arquitectura
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Descripción

Esta herramienta te permite poner los objetos seleccionados en una hoja de dibujo SVG. Si no existe ninguna hoja en el documento, se creará una por defecto.

This command is similar to the Drawing View command but is optimized for Draft objects. Contrary to that command, it can handle specific objects such as Draft Dimensions and Draft Texts, and it can render faces.

This command is now obsolete. Use the TechDraw Workbench and the TechDraw DraftView command instead.

On the left the selected Draft objects. On the right the created drawing views.

Utilización

  1. Selecciona los objetos que quieres poner en una hoja de dibujo
  2. Presiona el botón de Dibujo