Draft CloseLine

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Draft CloseLine and the translation is 9% complete.
Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎română • ‎svenska • ‎čeština • ‎русский
Arrow-left.svg Previous: Draft FinishLine.svg Finish line
Next: Undo line Draft UndoLine.svg Arrow-right.svg

Draft CloseLine.svg Draft CloseLine

Draft -> Utilities -> Close Line
Draft, Arch
Standard genväg
Introducerad i version
Se även
FinishLine, UndoLine


This command finishes the drawing of a current wire, and closes it by drawing a closing segment between the last point and the first one.

A closed wire can be set to display a filled face if the property DataMake Face is true.


  1. Start drawing a Draft Wire.svg Draft Wire
  2. Invoke the Close Line command several ways:
    • Press the Draft Lock.svg Close button in the Draft toolbar
    • Press the O keyboard shortcut
    • Use the Draft → Wire Tools → Close Line entry in the Draft menu


  • DataMake Face true or false