Krzywe: Szkic na powierzchni

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Curves SketchOnSurface and the translation is 7% complete.
Other languages:
English • ‎français • ‎italiano • ‎polski

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Arrow-left.svg Previous: Curves IsoCurve.svg IsoCurve

Curves SketchOnSurface.svg Curves SketchOnSurface

Menu location
Surfaces → Sketch on Surface
Workbenches
Curves
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool maps a sketch onto a face, like a label on a bottle. The sketch must be actually attached to a face (see Sketch.Support). The Map mode of the sketch has no effect on the result.

Curves SketchOnSurface demo.png

Above: shows the Sketch_On_Surface object applied to the cylinder face (left) and the source sketch in edit mode (right)

Usage

  1. Switch to the Curves workbench icon.svg Curves workbench (install from Std AddonMgr.svg Addon Manager is necessary, if not previously installed)
  2. There are 2 methods to use the SketchOnSurface tool:
    You already have a sketch that you want to map on a face
    1. Attach the sketch to the target face.
    2. Edit the sketch and add a Construction (blue) rectangle around the geometries. This rectangle will be the parametric bounds of the face.
    3. Exit edit mode.
    4. Select the sketch.
    5. Activate SketchOnSurface by either:
      • Pressing on the Curves SketchOnSurface.svg button
      • Using the Surfaces → Sketch on Surface entry in the Curves menu
    You have no sketch to map yet
    1. Select the target face in the 3D view
    2. Activate SketchOnSurface by either:
      • Pressing on the Curves SketchOnSurface.svg button
      • Using the Surfaces → Sketch on Surface entry in the Curves menu
    3. A Sketch_On_Surface object appears in the Tree view.
    4. Expand this object to make the Mapped_Sketch appear below.
    5. Edit the sketch and add geometries inside the blue construction bounds.
    6. A SketchOnSurface object will be created on the surface of your object based on this sketch.

Options

  • Fill Extrusion: When the Thickness value is not null, this will generate lofting faces (the blue faces in the above screenshot).
  • Fill Faces: This will fill all the geometrical figures closed in faces (the red faces in the above screenshot).
  • Offset: This will push the shapes mapped above into the target face. Do not put an offset greater than the thickness, it makes the face disappear on the inside.
  • Thickness: If not null, this will give thickness to the surfaces created above.

Notes

It is assumed that all geometry in the sketch is enclosed within the blue construction frame. This includes all other construction geometry, as well as the visible internal geometry of complex curves (Bezier, Ellipse). If this is not the case the bounding box of the sketch will be larger than the construction frame and the final mapping will be scaled down accordingly. If required hide the internal geometry that is not fully inside the construction frame.

Properties

Scripting

Arrow-left.svg Previous: Curves IsoCurve.svg IsoCurve