This page describes how to compile the FreeCAD source code on MacOS X. For other platforms, see Compiling.
These instructions have been tested on macOS Catalina with standard XCode 11.6. It is known to work on macOS BigSur Beta with XCode 12.0 beta. If you plan to use XCode Beta, please be sure to download Command Line Tools add on through a dmg package to workaround some libz dependency issues.
This page serves as a quick start, and is not intended to be comprehensive with regard to describing all the available build options.
If you just want to evaluate the latest pre-release build of FreeCAD, you can download pre-built binaries from here.
The following software must be installed to support the build process.
Homebrew Package Manager
Homebrew is a command line based package manager for macOS. The Homebrew main page provides an installation command line that you simply paste into a terminal window.
CMake is a build tool that generates a build configuration based on variables you specify. You then issue the 'make' command to actually build that configuration. The command-line version of CMake is automatically installed as part of the Homebrew installation, above. If you prefer to use a GUI version of CMake, you can download it from here.
FreeCAD maintains a Homebrew 'cask' which installs the required formulas and dependencies. Issue the following brew commands in your terminal.
brew tap freecad/freecad brew install eigen brew install --only-dependencies freecad
brew install may take quite a while, so you may want go grab a beverage. :-).
Alternately, you can install the individual dependencies manually by installing the following packages using
brew install ...:
qt@5- Only Qt5 is currently supported, support for Qt6 is a work-in-progress
coin3d- Note that as of this writing (Nov. 2022) this will install an unusable version of pyside@2 as a dependency.
There are several packages that are only available when you have tapped the freecad cask: you must do that (
brew tap freecad/freecad). Due to some historical bug workarounds, at the time of this writing (Nov. 2022) the versions of PySide2 and Shiboken2 installed by Homebrew are not usable because they force the use of Py_Limited_API, which FreeCAD does not support. It is expected that this workaround will be removed in the coming months, but in the meantime you must use the FreeCAD cask versions of PySide and Shiboken. Use
brew install ..., install the following packages:
You will also need to "link" PySide and Shiboken:
brew link email@example.com firstname.lastname@example.org
In some cases the packages installed by Homebrew do not use the same Python version: for example, at the time of this writing PySide2 uses Python 3.10, but boost-python3 uses Python 3.11. While it is possible to "roll back" the more advanced version (so that in this case boost-python3 uses Python 3.10) this is an advanced operation, and in many cases it is best to wait for an update to the other package. If you want to pursue that path anyway, look at the "brew extract" command, which you can use to extract a formula into a new cask (typically freecad/freecad). You can then edit that formula as needed.
You will need to set the path to Qt: Qt5 is currently supported, while support for Qt6 is a work-in-progress. Set FREECAD_QT_VERSION to "Auto" or "5" to select Qt5 (the default). On the command line, use something like:
cmake \ -DCMAKE_BUILD_TYPE="Release" \ -DPYTHON_EXECUTABLE="/usr/local/bin/python3" \ -DQt5_DIR="/usr/local/Cellar/qt@5/5.15.7/lib/cmake/Qt5" \ -DPySide2_DIR="/usr/local/Cellaremail@example.com/5.15.5/lib/cmake/PySide2-5.15.5" \ -DShiboken2_DIR="/usr/local/Cellarfirstname.lastname@example.org/5.15.5_1/lib/cmake/Shiboken2-5.15.5" \ ../freecad-source
Get the source
In the following instructions, the source and build folders are created side-by-side under
but you can use whatever folders you want.
mkdir ~/FreeCAD cd ~/FreeCAD
The following command will clone the FreeCAD git repository into a directory called FreeCAD-git.
git clone https://github.com/FreeCAD/FreeCAD FreeCAD-git
Create the build folder.
Next, we will run CMake to generate the build configuration. Several options must be passed to CMake. The following table describes the options and gives some background.
|CMAKE_BUILD_TYPE||Release (STRING)||Release or Debug. Debug is generally used for developer-level testing but may also be required for user-level testing and troubleshooting.|
|CMAKE_PREFIX_PATH||"/usr/local/opt/qt5152;" ... (PATH)||Required to build with Qt5. See note below. You also need to add path to VTK libraries and NGLIB libraries cmake configuration file.|
|FREECAD_CREATE_MAC_APP||1 (BOOL)||Create a FreeCAD.app bundle at the location specified in CMAKE_INSTALL_PREFIX, when the 'make install' command issued.|
|CMAKE_INSTALL_PREFIX||"./.." (PATH)||Path where you want to generate the FreeCAD.app bundle.|
|BUILD_FEM_NETGEN||1 (BOOL)||Required if choosing to build the FEM tools.|
Note: Command line to generate CMAKE_PREFIX_PATH:
ls -d $(brew list -1 | grep qt | tail -1 | xargs brew --cellar)/*/lib/cmake
Open the CMake app, and fill in the source and build folder fields. In this example, it would be /Users/username/FreeCAD/FreeCAD-git for the source, and /Users/username/FreeCAD/build for the build folder.
Next, click the Configure button to populate the list of configuration options. This will display a dialog asking you to specify what generator to use. Leave it at the default Unix Makefiles. Configuring will fail the first time because there are some options that need to be changed. Note: You will need to check the Advanced checkbox to get all of the options.
Set options from the table above, then click Configure again and then Generate.
CMake command line
Enter the following in the terminal.
export PREFIX_PATH="/usr/local/opt/qt5152;\ /usr/local/Cellar/nglib/v6.2.2007/Contents/Resources;\ /usr/local/Cellaremail@example.com/8.2.0_1/lib/cmake;"
$cd ~/FreeCAD/build $cmake \ -DCMAKE_BUILD_TYPE="Release" \ -DBUILD_QT5=1 \ -DWITH_PYTHON3=1 \ -DCMAKE_PREFIX_PATH="$PREFIX_PATH" \ -DPYTHON_EXECUTABLE="/usr/local/bin/python3" \ -DFREECAD_USE_EXTERNAL_KDL=1 \ -DCMAKE_CXX_FLAGS='-std=c++14' \ -DBUILD_FEM_NETGEN=1 \ -DFREECAD_CREATE_MAC_APP=1 \ -DCMAKE_INSTALL_PREFIX="./.." \ ../FreeCAD-git/
Finally, from a terminal run make to compile and link FreeCAD, and generate the app bundle.
cd ~/FreeCAD/build make -j5 install
The -j option specifies how many make processes to run at once. One plus the number of CPU cores is usually a good number to use. However, if compiling fails for some reason, it is useful to rerun make without the -j option, so that you can see exactly where the error occurred.
See also Compiling - Speeding up.
If make finishes without any errors, you can now launch FreeCAD by double clicking the executable in the Finder.
Updating from Github
FreeCAD development happens fast; every day or so there are bug fixes or new features. To get the latest changes, use git to update the source directory (see Source code management), then re-run the CMake and make steps above. It is not usually necessary to start with a clean build directory in this case, and subsequent compiles will generally go much faster than the first one.
Building with Qt4 and Python 2.7
FreeCAD has transitioned from Qt 4 to Qt 5 as well as homebrew. Qt 4 is no longer available as an option for new build on macOS following Qt 5 transition. Python 2.7 has been deprecated within homebrew and upcoming macOS and we do not support it anymore for macOS build either.
Segfault on Qt5 launch
If Qt4 was previously installed via brew, and you then build with Qt5, you may get a EXC_BAD_ACCESS (SEGSEGV) exception when launching the new Qt5 build. The fix for this is to manually uninstall Qt4.
brew uninstall --ignore-dependencies --force firstname.lastname@example.org email@example.com firstname.lastname@example.org cartr/qt4/qt-legacy-formula
"No CMAKE_Fortran_COMPILER could be found." during configuration - Older versions of FreeCAD will need a fortran compiler installed. With Homebrew, do "brew install gcc" and try configuring again, giving cmake the path to Fortran ie -DCMAKE_Fortran_COMPILER=/opt/local/bin/gfortran-mp-4.9 . Or, preferably use a more current version of FreeCAD source!
When using CMake versions older than 3.1.0, it's necessary to set CMake variable FREETYPE_INCLUDE_DIR_freetype2 manually, eg /usr/local/include/freetype2
Additional Build Instructions
FreeCAD can be built against the latest git master hosted on github, and launched from a CLI using libraries provided by the homebrew-freecad tap. For a complete list of build instructions see here.