Here is the project plan for the Assembly module as part of the Development roadmap.
- 1 Purpose and principles
- 2 Outcome
- 3 Brainstorming
- 4 Organizing
- 5 STEP check loop
- 6 Next actions
- 7 Tutorial
Purpose and principles
This is a software development project aimed to implement assembly and product creation capabilities. It's about implementing some core features into the CAD modules of FreeCAD, Part and Assembly.
The development steps are planned here and tracked in the issue tracking system to get a well formed change log: Issue tracker
The aim of the project is to enable FreeCAD to accomplish a design task like this one:
This will be achieved by using the Assembly workbench to put all the different kinds of parts together with constraints and stay as close as possible to the ISO 10303 specification to allow easy model exchange.
Another aim is to utilize ODE for kinematics.
A key feature to real world designs is the ability to split a design into handleable pieces. Its impossible to work on all aspects of a design at the same time or alone. That is true for the geometry and also for engineering tasks like FEM or CAM. Therefore FreeCAD needs the ability to split models. That opens some possibilities:
- Late loading - Only need resources like Graphics and main memory for the piece you're working on.
- Concurrent engineering - allows many people to work on the same design
- Fine grained Version control - better control over various aspects of the design
- and many more....
A multi-model design could look like that:
Multi-model means a lot of files belonging to one project, most likely under a common directory. A project file and a project browser can help organizing the files. Also it can save additional information about the project or a project website.
1. Two modes, the "Simple" and the "Project" mode. Simple mean only one document and all the assemblies and parts go in one document. If a Project is opened or created FreeCAD is in project mode.
2. Projects. The position of the FCPrj file on the drive defines a root directory. All files below this directory are defined with relative paths to the root directory. An additional view on the left side will hold the ProjectExplorer which shows the directory tree with the handled files. This root directory is also used as root for a SVN sand box, which allows later eased sharing and Version control. External references (towards a directory outside root, a server share or a web resource) will be handled and displayed separately in the ProjectExplorer (one pseudo directory for each file server or web server). This makes it possible to get a fast overview about external references and re-route them.
Now copyright of 3D models is an interesting field. 3D models do fall under the copyright. The copyright falls to the creator of the model. It's only possible to protect the shape, which is represented by the model, by a patent or a design patent (US). But patents cover only the creation of a physical part to earn money. As an example the Microsoft Mouse design patent.
So we have to remember the creator (copyright holder) and any kind of license for each model/product/file of a design. For the license I would use the CC type licenses. http://creativecommons.org/
Abbreviation Keys for CC licenses:
- BY = Attribution only
- BY-ND = Attribution-NoDerivatives
- BY-NC-ND = Attribution-NonCommercial- NoDerivatives
- BY-NC = Attribution-NonCommercial
- BY-NC-SA = Attribution-NonCommercial- ShareAlike
- BY-SA = Attribution-ShareAlike
- PD = Dedicated to or marked as being in the public domain via one of our public domain tools, or other public domain work; adaptations of works in the public domain may be built upon and licensed by the creator under any license terms desired
Additionally an URL link to the full license document (in case of custom licenses)
The ISO 10303 (STEP) standard is very important in this field. It's the only good standardized, widely discussed and recognized definition of product structures I know of.
Here some links with info:
- ISO 10303 on Wikipedia
- WikiStep.org with a lot of basic info but mostly toward STEP-NC
- The product structure in STEP
- Some examples about STEP
- ISO 10303-11 about the modeling language (EXPRESS)
- A Wikipedia article about product modeling
- Overview of Part 41 -- Fundamentals of Product Description and Support
- Overview of Part 44 (edition 2) -- Product Structure Configuration
- Examples of small AP 214 files
An important role in building up large models and products take the assembly constraints, which formulate certain rules how parts assemble into a product. Mainly these are Fix, FaceToFace, Angle, Offset and some kind of pattern instantiation. These constraints need a specialized solver to keep them up if the parts change. This solver is fundamentally different to the Sketch solver. I think we have to go for a graph based approach on this...
A further step would be to use ODE, or similar libraries, to put the parts and the assembly constraints together to do a kinematic simulation of machines. That would allow checking for collisions and exploring the conditions of a mechanical system.
An important point is the version control and distributed development. With multi-model design we are able to split designs in smaller pieces and can distribute work among a team. For a software developer "distributed" and "Version" sounds familiar, so why not use a DVCS. A good comparison is here.
Since we deal with big data, and data which can not be easily diffed, we are limited to those which use the snapshot persistence model. Any system storing just diffs will have grave problems with our data (personally tested with Mercurial and Catia files). After sorting out commercial and non-free, basically only Git and SVN remain.
Using Git for the task leaves us with two big frontiers:
- Git is very complicated; Branching, merging and tagging along a non- linear development path let alone merging with remote repositories (push, pull) will put a lot of complexity in that matter. To hide it from the user will be a challenging task.
- Git allow Merge and Diff handlers for certain file types; We need one for .fcstd. This handler has to examine two FreeCAD documents and show and merge differences in the objects, features and parameters. Also not easy.
But using git would open a lot of possibilities even high-class PLM system would dream of...
Here some development task needed for a decent Assembly/Product design:
The assembly will demand some changes in the base system and infrastructure layer of FreeCAD.
Multi-Model was in mind from the beginning of FreeCAD's design. Therefore we have a multi-document interface and can load unlimited documents. But we need to upgrade especially the 3D-Viewer to handle showing more then one document in its view (Part-Trees).
Since in Assembly the composition of parts and sub-assemblies is the main workflow, the tools to stack (group) Parts in a tree have to be implemented. Unlike a DocumentObjectGroup the Assembly group has to deal with visibility and placement of the children. Best done by stacking ViewProvider on each other. That needs a kind of ClaimChildren() interface to the ViewProviders.
Unified Drag/Drop/Copy/Paste interface
An interface allows ViewProvider and Workbenches full control over Drag/Drop/Copy/Paste operations in the tree or the 3D view.
Handling of doped links (from internal or external browsers). Means loading resources over (potential) slow connections (http).
Describing material and its properties is a vital part of a CAD/CAE system. Material has a lot of properties and names heavily dependent on the field its use. E.g. FEM and mechanical engineering have different frameworks and standards to describe Material.
For the Material description a special article is made: Material
Class tree to deal with concepts needed. References, interfaces, document links, views, compounds, constraints, configurations, and many more...
STEP check loop
Implementing a first STEP importer for more than geometry and color to check if the object model holds for a wider usage.
Assembly constraint solver
Define an interface to an assembly constraint solver, very similar to the Sketcher solver interface.
Physics simulation interface
Interface to allow (external) (multi)physics simulation software to take control over the positioning of the Parts of an assembly. This would allow to use "bullet" or "ODE" to do kinematic tests and DMU.
- Object model