Złożenie 3: Wiązanie projekt odległości punktów

From FreeCAD Documentation
This page is a translated version of the page Assembly3 ConstraintPointsProjectDistance and the translation is 11% complete.

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:

Assembly3 ConstraintPointsProjectDistance

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

The Points project distance command constrains the distance of two 2D points in relation to a Straight line.

Based on the line's direction (the z axis of its implicit coordinate system (ICS)) setting the distance of two points along the line means to add the distance value to the first point's z value to receive the second point's z value (and ignoring the x and y values).

Usage

  1. Select two points (2D or 3D).
  2. Select a straight line (2D or 3D).
  3. Activate the Points project distance command using the:
  4. Press the Solve constraints or the Quick solve button to recompute
(if Auto recompute and Smart recompute are disabled).