# Złożenie 3: Wiązanie punkt na okręgu

This page is a translated version of the page Assembly3 ConstraintPointOnCircle and the translation is 9% complete.

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:
Deutsch • ‎English • ‎français • ‎polski
Previous: Point on line

Assembly3 ConstraintPointOnCircle

None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
None

## Description

This tool builds a link between two objects of an assembly and fixes the distance between them and the orientation to each other. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following object is moved to a position where the point element's origin lies on the circular element's xy-plane with an offset from the z-axis (matching x and y values according to the radius).

Point elements have no stretch in any direction (zero length) and so there's no orientation detectable i.e. their ICS are only to match other elements' settings. The orientation of the ICSs always stays the same as the global coordinate system's orientation and can not be used to reduce any degrees of freedom related to rotation.

The position on the circular element (arc length from the start point) is not defined. Related to the first object the following object can still spin around the origin (around all three axes). This is leaving 4 degrees of freedom (DOFs) for each link unconstrained.

## Usage

1. Place two objects into an assembly.
2. Select one point element of one object and one circular face or edge element of the other object.
3. Press the button.

Previous: Point on line