Assembly3 ConstraintMultiParallel

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:

Same orientation

Angle

Assembly3

Menu location
Assembly3 ConstraintMultiParallel
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool builds a link between two or more objects of an assembly and matches their orientation. The selected elements of each object or more precise their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following objects are moved to positions where all z-axes point in the same direction i.e. all z-axes are parallel.

The offset of their origins in x-, y- and z-direction and the angles between the x-axes (and y-axes as well) are not defined. Related to the first object the following objects can still move along the x-, y- and z-axis and spin around the z-axis. This is leaving 4 degrees of freedom (DOFs) for each link unconstrained.

The constraint accepts straight edges and planar faces, which become parallel.