Translations:Draft ShapeString tutorial/38/en

From FreeCAD Documentation
Revision as of 15:39, 24 November 2019 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

15. In the tree view select Chamfer first, and then Extrude.

15.1. Then press Cut. This will create a Cut object. This is the final object.
Note: the order in which you select the objects is important for the cut operation. The base object is selected first, and the subtracting object comes at the end.
15.2. In the tree view, select Cut, in the View tab change the value of Line Width to 2.0.