Translations:Arch Roof/18/ro

1. Create a wire with following the counterclockwise direction and select it.
   • 
2. Press the Arch Roof button, or press R then F keys
3. The default roof object could have a strange shape, it's because the tool have not all the needed informations.
4. After creating the default roof, double click on the object in the tree view to access and edit all the properties. Angle must be between 0 and 90.
   • 
5. Each line correspond to a roof pane. So you can set properties you want for each roof pane.
6. To help you, you can set Angle or Run to 0 and defined a Relative Id, this make automatic calculs to find the data relative to the relative Id.
7. It work like this :
   1. If Angle = 0 and Run = 0 then profile is identical to the relative profile.
   2. If Angle = 0 then angle is calculated so that the height is the same one as the relative profile.
   3. If Run = 0 then Run is calculated so that the height is the same one as the relative profile.
8. At the end, set an angle to 90° to make a gable.
   • 
9. Also you can check this video : https://www.youtube.com/watch?v=4Urwru71dVk