Cotă Verticală TechDraw

From FreeCAD Documentation
Revision as of 21:55, 21 March 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

TechDraw Dimension Vertical

poziția meniului
TechDraw → Dimension Vertical
Ateliere
TechDraw
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
TechDraw Dimension Length, TechDraw Dimension Horizontal

Descriere

Instrumentul pentru cote verticale adaugă o cotă verticală unei imagini. Cota poate fi între două vârfuri, lungimea unei muchii sau distanța verticală dintre două margini. Distanța va fi inițial distanța proiectată(adică așa cum este reprezentată în desen), dar această distanță poate fi înlocuită prin distanța 3D reală utilizând instrumentul Link Dimension .

The Dimension Vertical tool adds a vertical dimension to a View. The dimension may be between two vertices, the length of one edge or the vertical distance between 2 edges. The distance will initially be the projected distance (ie as shown on the drawing), but this may be changed to the actual 3D distance using the Link Dimension tool.

Length dimension taken from two arbitrary nodes of the view; the distance is measured vertically

Cum se folosește

  1. Selectați punctele sau muchiile care definesc măsurarea dvs.
  2. Apăsați butonul File:Dimension Vertical.png Dimension Vertical
  3. O cotă va fi adăugată la View. Cota poate fi glisată în poziția dorită.
  1. Select the points or edge which define your measurement.
  2. Press the Dimension Vertical button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.

Limitations

Dimension objects are vulnerable to "topological naming" issues. See the information in the TechDraw Dimension Length tool for more information.

Proprietăți

This object has the same properties as the TechDraw Dimension Length tool. See that tool for details.

This object has the same properties as the TechDraw Dimension Length tool. See that tool for details.

Script

Cotele verticale pot fi adăugate la Pages utilizând Python.

See also: TechDraw API and FreeCAD Scripting Basics.

The Dimension Vertical tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "DistanceX"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)