Croquizador SeleccionarElementosConGdL

From FreeCAD Documentation
Revision as of 20:42, 29 March 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Sketcher Select solver DoFs

Ubicación en el Menú
Sketch → Herramientas de croquis → Select solver DoFs
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
Ninguno
Introducido en versión
0.18
Ver también
Ninguno

Descripción

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Usage

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:

    Under-constrained sketch with X degrees of freedom

    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.