Sketcher: Constrângere de rază

From FreeCAD Documentation
Revision as of 07:24, 7 October 2018 by Luc (talk | contribs) (Created page with "'''Notă:''' the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse...")

Sketcher ConstrainRadius

Menu location
Sketch → Sketcher constraints → Constrain radius
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
Constrain distance, Constrain horizontal distance, Constrain vertical distance

Descriere

Această constrângere obligă valoarea razei unui cerc sau a unui arc de cerc să aibă o valoare specifică. Dacă este selectat mai mult de un cerc sau un arc de cerc înainte de lansarea comenzii, o solicitare va întreba dacă toate elementele selectate ar trebui să partajeze aceeași rază. În cazul unui răspuns afirmativ, se va adăuga o constrângere de rază și o equal length va fi adăugată la toate elementele. În negativ, vor fi create constrângeri separate de rază pentru fiecare cerc / arc, dar cu valori egale care vor fi editate separat după crearea.

Cum se folosește

  1. Pick one or more circles or arcs.
  2. Press the Constrain radius button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
  4. Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.

Notă: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.