Restrição horizontal

From FreeCAD Documentation
Revision as of 21:37, 28 March 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Constraint Horizontal

Veja também
Sketch → Sketcher constraints → Constrain horizontally
Bancadas de trabalho
Sketcher
Atalho padrão
H
Introduzido na versão
-
Veja também
Constraint Vertical

Descrição

The Horizontal Constraint forces a selected line or lines in the sketch to be parallel to the horizontal axis of the sketch.

Como usar

Select a line in the sketch by clicking on it.

The line turns dark green.

Apply the Horizontal Constraint by clicking on the Horizontal Constraint icon in the Sketcher Constraints toolbar or by selecting the Constrain horizontally menu item in the Sketcher constraints sub menu of the Sketcher menu item in the Sketcher work bench (or the Part Design menu item of the Part Design work bench). The selected line is constrained to be parallel to the horizontal axis of the sketch.

Multiple lines may be selected,

and then applying the constraint as described above, they are constrained to be parallel to the sketch horizontal axis.