Vazba Shodné (EqualLength)
Constraint EqualLength |
Umístění Menu |
---|
Sketch → Sketcher constraints → Constrain equal |
Pracovní stoly |
Sketcher, PartDesign |
Výchozí zástupce |
E |
Představen ve verzi |
- |
Viz také |
Constraint Radius |
Popis
Vazba Shodné zajistí, že dva nebo více přímkových segmentů v přímce, lomené čáře nebo obdélníku budou mít stejnou délku. Je-li aplikováno na úhel nebo kružnici, jsou úhly nastaveny na stejnou velikost. Vazba nemůže být použita na základní konstrukce, které nejsou stejného typu (např. na segment přímky a úhel).
The Constrain Equal constraint forces two or more line segments in a line, poly-line or rectangle to have equal length. If applied to arcs or circles the radii are constrained to be equal. It cannot be applied to geometry primitives which are not of the same type (e.g. line segments and arcs).
Použití
Zde uvedený náčrt obsahuje několik nakreslených základních prvků (přímka, lomená čára, obdélník, úhel a kružnice).
Vyberte dva nebo více segmentů (např. přímka a jedna strana obdélníka).
Klikněte na ikonu Shodné (EqualLength)
v pruhu nástrojů kreslení (na náčrtové pracovní ploše nebo ploše pro Díl) nebo vyberte položku menu Vazba Shodné ze submenu Náčrty Vazba v hlavním menu Náčrtové pracovní plochy nebo plochy Díl, podle toho ve které pracovní ploše jste. Tím aplikujete tuto vazbu na vybrané položky.
Teď na náčrtu vyberte úhel a kružnici.
a aplikujte vazbu Shodné (Equal) jako předtím.
Teď vyberte přímkový segment, všechny segmenty lomené čáry a jednu ze zbývajících neupravených stran obdélníka
a aplikujte vazbu Shodné (Equal) jako předtím.
Vyberet přímkový segment a úhel
a aplikujte vazbu Shodné (Equal) jako předtím. Vyskakovací okénko zobrazí zprávu, která indikuje, že vybrané položky musejí být stejného konstrukčního typu (přímky s nulovým úhlem nebo přímky s nenulovým úhlem).
The example sketch below contains a number of sketch primitives (line, poly-line, rectangle, arc and circle).
Select two or more line segments (e.g. line and one side of the rectangle).
Click on Constrain equal in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.
Now select the arc and the circle in the sketch.
and apply Constrain equal as before.
Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle
and apply Constrain equal as before.
Select the line segment and the arc
and apply Constrain equal as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).
Scripting
Sketch.addConstraint(Sketcher.Constraint('Equal', Edge1, Edge2))
The Sketcher scripting page explains the values which can be used for Edge1
and Edge2
and contains further examples on how to create constraints from Python scripts.
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub