Sketcher: Vincolo Diametro

From FreeCAD Documentation
Revision as of 19:32, 31 October 2018 by Renatorivo (talk | contribs) (Created page with "== Utilizzo ==")

Diametro

Posizione nel menu
Sketch → Vincoli → Diametro
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Distanza, Distanza orizzontale, Distanza verticale

Descrizione

Questo vincolo forza il valore del diametro di un cerchio o di un arco a un valore specifico. Se viene selezionato più di un cerchio o arco prima di lanciare il comando, un prompt chiede se tutti gli elementi selezionati devono condividere lo stesso diametro. Nel caso di una risposta affermativa, viene aggiunto un vincolo di diametro e un vincolo di uguale lunghezza a tutti gli elementi. Se la risposta è negativa, vengono creati vincoli di diametro separati per ogni cerchio o arco ma con valori uguali che è possibile modificare separatamente dopo la creazione.


Utilizzo

  1. Pick one or more circles or arcs.
  2. Press the Constrain diameter button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate. In case multiple circles/arcs were selected, all constraints will adopt this value. Edit their separate values by double-clicking on the dimension label in the 3D view; or in the Constraints list, double-click on the constraint or right-click and select Change value.
  4. Optionally the dimension label and line can be moved and rotated in the 3D view by clicking on the value and dragging while keeping the left mouse button pressed.

Note: the constraint tool can also be started with no prior selection. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.