CAM ToolController

From FreeCAD Documentation
Revision as of 18:17, 6 September 2020 by Renatorivo (talk | contribs)
Other languages:

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

A tool controller carries properties for how a tool should be used in one or more operations.

For example a tool, like a 1/4 inch cutter can run at many different spindle speeds and feed rates. The same tool might be used in different ways in the same job.

properties:

feed speed (h) feed speed (v)

rapid speed (h) rapid speed (v)

Spindle Speed (rpm) Spindle direction (forward/reverse)

Tool Number