CAM: Edytor biblioteki narzędzi
Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.
Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.
Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.
Path ToolBitLibraryOpen |
Menu location |
---|
Path → ToolBit Library editor |
Workbenches |
Path |
Default shortcut |
None |
Introduced in version |
0.19 |
See also |
Path ToolBitDock, Path Tools, Path ToolBit |
Description
The library manager (shown above) is the dialog for creating, managing, and organize toolbits. Launching the library manager from either the Path menu or from the 'manager' button in the dock will display the manager as a modal dialog.
From here the user can perform all task related to toolbit management :
- Select a default library
- Create/edit/delete Toolbits
- Create libraries
- Modify libraries by adding and removing toolbits
- Save a library to a new name
- Export a library to the LinuxCNC tooltable (.tbl) format
Only the creation of new toolshapes cannot be done from the toolbit library manager. This is an advanced topic. (see Path ToolShape creation).
The left pane (1) shows a list of all libraries in the current working directory. The current library is highlighted.
The current working directory path is shown in the window title bar (2). A file selector (3) can be used to select a different working directory.
The right side pane (4) shows all toolbits in the currently selected library. Doubleclicking in the left column allows you to change the default tool number for this toolbit. The toolnumber will be used when creating a tool controller. The number is an attribute of the library. This means the same toolbit can exist in multiple tool libraries and have different default toolnumbers in each.
Tools at the top (5) are used to create/add/remove toolbits from the current library.
The save as button (6) can be used to write the library to a new file or export to a valid tooltable format. Currently only LinuxCNC format is supported.
The manager will remember the last active tool library and working directory between uses.
The close button (7) at bottom right will dismiss the tool library manager. Any changes to the current library are persisted to disk. Pressing the Escape key will dismiss the manager but not make any changes to the current library. Whichever library is selected when the manager is dismissed will become the new default and will be shown in the Toolbit Dock.
Usage
Manage Toolbits
- There are several ways to open the Toolbit Library Manager:
- Select a library from the list.
- Create/Add/Remove toolbits from the library.
- Double-click a row to edit the toolbit.
- Close the manager.
- The selected library will become the default library for the dock.
Editing Toolbits
There are several ways to edit the toolbits and library:
A. By clicking the column headers of the library you can sort the toolbit library. The library will retain the sort and use it in the dock.
B. By doubleclicking in the first column you can edit the toolbit number. This will be the default tool number used when creating a new tool controller. It is possible to use the same number for multiple toolbits.
C. Double clicking anywhere else in the row will open the toolbit editing panel. From here you can edit other properties of the toolbit.
Related
- Polecenia projektu: Zadanie, Przetwarzanie końcowe, Bezpieczeństwo, Eksport szablonu
- Polecenia narzędzi: Przeglądaj polecenia ścieżki, Symulator, Krawędzie w pętli, Przełącz aktywną operację, Otwarta biblioteka narzędzi, Stacja dokująca narzędzi
- Operacje podstawowe: Kontur, Kształt kieszeni, Owierty, Powierzchnia obróbki, Helisa, Algorytm adaptacyjny, Wpust, Grawer, Usuwanie zadziorów, Wycięcie V
- Operacje 3D: Obiekt 3D kieszeni, Powierzchnia 3D, Linia poziomu
- Ulepszenia: Odwzorowanie osi, Ulepszenie ścieżki konturu, Nadcięcie w narożniku, Rylec, Wprowadzenie / Wyprowadzenie, Parkowanie narzędzia, Pola mocujące, Korekta głębokości Z
- Polecenia uzupełniające: Mocowanie, Komentarz, Stop, Wstawka G-code, Sonda, G-code z kształtu
- Modyfikacja zadania: Kopia operacji w zadaniu, Szyk, Szybka kopia
- Operacje specjalne: Frezowanie gwintów
- Różności: Obszar, Obszar płaszczyzny roboczej
- Konstrukcja narzędzi: Narzędzia, Kształt narzędzia, Końcówki skrawające, Biblioteka narzędzi, Kontroler narzędzi
- Dodatek: Preferencje, Tworzenie skryptów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web