Part: Elice/Helix

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Part Elice
poziția meniului
Part → Create Primitives → Helix
Ateliere
Part, OpenSCAD
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
nici unul

Descriere

Un element primitiv geometric este Elicea care este disponibilă din dialogul Create Primitives în Atelierul de lucru Part.

The Part Helix geometric primitive creates a helix shape, defined by a radius, a pitch, and a total height.

A common usage for the helix primitive is for creating screw threads in conjunction with a closed profile, and the Sweep operation. This process works essentially the same in the PartDesign Workbench by using the PartDesign Additive pipe tool.

Cum se folosește

The Create Primitives dialogue can be accessed via the CreatePrimitives icon located in the Part menu or the Part toolbar, in the Part Workbench. A common usage for the Helix is for threads in conjunction with the sweep operation.

Sub Windows "Elica"

|

Sub Linux "Helix"

Parametrii Pitch: Pasul corespunde spațiului dintre două "întoarceri" consecutive ale spiralei măsurate de-a lungul axei principale a spiralei. Height: The height corresponds to the overall height of the helix measured along the main axis of the helix. Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom. Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between 0 and +90 deg. Right-handed or Left-handed: This parameter specifies the handedness of the helix. Location X: The main axis of the helix will be translated along the x axis of the value you indicate in this field. Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field. Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field. Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector. 3D View: vă permite să selectați centrul în vizualizarea 3D

• Pitch:The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
• Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
• Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top or bottom.
• Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay cone. This angle corresponds to the angle of the cone. The value must be comprised between 0 and +90 deg.
• Right-handed or Left-handed: This parameter specifies the handedness of the helix.

Location

• X: The main axis of the helix will be translated along the x axis of the value you indicate in this field.
• Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field.
• Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field.
• Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
• 3D View: allows you select center in the 3D view

Opțiuni

Properties

Odată ce ați creat elicea, aveți opțiunea de a modifica parametrii.

The parameters in this menu are similar to those described above. Base Placement: allows you to move or rotate the helix Angle:

Part

• Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder

---

• Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment

---

• Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR

---

• Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta

---

• Other tools: Import, Export, Box selection, Shape from Mesh, Points from mesh, Convert to solid, Reverse shapes, Create simple copy, Create transformed copy, Create shape element copy, Refine shape, Check geometry, Defeaturing, Appearance, Color per face

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub