Объединение

From FreeCAD Documentation
Revision as of 19:54, 8 December 2020 by FuzzyBot (talk | contribs) (Part of translatable page "Part Union")

Part Union

Системное название
Нет
Расположение в меню
Деталь → Булевы операции → Объединение
Верстаки
Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Обрезать, Пересечение, Part Boolean

Описание

The Part Fuse tool fuses (unites) selected Part objects into one. This operation is fully parametric and the components can be modified and the result recomputed.

Note: Эта команда - автоматизированная форма Булевой операции.

Использование

  1. Select two or more shapes
  2. There are several ways to invoke the command:
    • Press the Part Fuse button in the Part tools toolbar
    • Use the Part → Boolean → Union entry in the Part menu

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.

  • Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
  • Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
  • Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Items can be added and removed from the fusion, by dragging them in or out of the fusion feature in the tree view with the mouse. A manual recompute (press F5 key or click on the Refresh/Recompute icon) is required to see the results.

После завершения этой операции может оказаться полезным уточнить форму с помощью команды Уточнить форму.