Część: Elipsoida
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
Part Ellipsoid |
Menu location |
---|
Part → Create primitives → Ellipsoid |
Workbenches |
Part, OpenSCAD |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part Create primitives |
Description
The Part Ellipsoid command creates a parametric Ellipsoid solid.
The shape produced is limited in FreeCAD to being a solid (optionally truncated) spheroid, the shape you would create by rotating an ellipse around one of its axis. By default it is a Oblate Spheroid, the shape you would create by rotating an ellipse around its minor axis. The parameters can be changed to form a Prolate Spheroid.
The default spheroid in FreeCAD will have a circle for any cross section parallel to the XY plane. The cross section parallel to the other two planes will be an ellipse.
In mathematics, an Ellipsoid would have an elliptical cross section in all three planes.
Usage
A parametric Ellipsoid solid is available from the Create Primitives dialogue in the Part workbench.
- Switch to the Part Workbench
- Access the Ellipsoid command several ways:
- Through the Create Primitives dialogue, pressing the Primitives button located in the Part toolbar
- Using the Part → Create primitives → Ellipsoid entry in the Part menu
Properties
- Radius 1, by default the minor radius parallel to the Z-axis,
- Radius 2, by default the major radius parallel to the XY plane, it is also the maximum radius of the circular cross section
- Angle 1, lower truncation of the ellipsoid, parallel to the circular cross section (-90 degrees in a full spheroid)
- Angle 2, upper truncation of the ellipsoid, parallel to the circular cross section (90 degrees in a full spheroid)
- Angle 3, angle of rotation of the elliptical cross section (360 degrees in a full spheroid)
- Bryły pierwotne: Prostopadłościan, Walec, Sfera, Stożek, Torus, Rura, Bryły pierwotne, Konstruktor kształtu
- Tworzenie i modyfikacja: Wyciągnij, Wyciągnij przez obrót, Odbicie lustrzane, Zaokrąglenie, Fazka, Utwórz ścianę z linii łamanych, Powierzchnia prostokreślna, Wyciągnięcie przez profile, Wyciągnięcie po ścieżce, Przecięcie, Przekrój poprzeczny, Odsunięcie 3D, Odsunięcie 2D, Grubość, Rzutowanie na powierzchnię, Mocowanie
- Funkcje logiczne: Utwórz złożenie, Rozbij złożenie, Filtr złożeń, Funkcje logiczne, Wytnij, Połączenie, Część wspólna, Przyłącz, Dołącz do osadzenia, Wycięcie połączenia, Funkcja logiczna rozdzielająca, Pokrój część, Krojenie, XOR
- Wymiarowanie: Wymiarowanie liniowe, Wymiarowanie kątowe, Odśwież wymiary, Usuń wymiary, Przełącz widoczność wymiaru, Przełącz widoczność wymiarów przestrzennych, Przełącz widoczność wymiarów przyrostowych
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web