Part: Verificare Geometrie
Part CheckGeometry |
Menu location |
---|
Part → Check geometry |
Workbenches |
Part |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
Introducere
L’outil de vérification de la géométrie vous permet de vérifier si vous avez un solide valide.
Utilizare
Instrumentul este disponibil în bara de lucru Part din meniul Part sau cu butonul din bara de instrumente Booleene. Selectați o piesă (aveți grijă să selectați întreaga componentă și nu doar o fațetă pentru a verifica dacă există un solid valid), apoi lansați instrumentul. Veți vedea rezultatele în panoul Task.
Results will be reported in the Task panel. If the check produced errors: click in the report on a specific error message and the corresponding geometric object (edge, face, etc.) will be highlighted in the 3D view.
Note: FreeCAD has no automatic repair methods for solids, so you need to look at the steps involved to model this specific geometry and try to fix the error on your own.
Options
Skip settings page
If ticked, subsequent invocations of the tool skip showing the Settings task panel.
Run BOP check
Dacă doriți să activați verificările extra BOP (BOP = Operații booleene), apoi urmați acești pași: Tools menu > Edit Parameters > Preferences > Mod > Part > CheckGeometry apoi, în panoul din dreapta, faceți dublu clic sub valoarea pentru parametrul RunBOPCheck și setați la true, apoi faceți clic pe Save on disk, închideți și reporniți. Vedeți captura de ecran de mai jos.
Log errors
If ticked, any errors found are also logged in the report view. introduced in version 0.19
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub