Part: Verificare Geometrie
|
|
| Menu location |
|---|
| Part → Check geometry |
| Workbenches |
| Part |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| None |
Description
Introducere
L’outil de vérification de la géométrie vous permet de vérifier si vous avez un solide valide.
Utilizare
Instrumentul este disponibil în bara de lucru Part din meniul Part sau cu butonul din bara de instrumente Booleene. Selectați o piesă (aveți grijă să selectați întreaga componentă și nu doar o fațetă pentru a verifica dacă există un solid valid), apoi lansați instrumentul. Veți vedea rezultatele în panoul Task.
Results will be reported in the Task panel. If the check produced errors: click in the report on a specific error message and the corresponding geometric object (edge, face, etc.) will be highlighted in the 3D view.
Options
Skip settings page
If ticked, subsequent invocations of the tool skip showing the Settings task panel.
Run BOP check
Dacă doriți să activați verificările extra BOP (BOP = Operații booleene), apoi urmați acești pași: Tools menu > Edit Parameters > Preferences > Mod > Part > CheckGeometry apoi, în panoul din dreapta, faceți dublu clic sub valoarea pentru parametrul RunBOPCheck și setați la true, apoi faceți clic pe Save on disk, închideți și reporniți. Vedeți captura de ecran de mai jos.
Log errors
If ticked, any errors found are also logged in the report view. introduced in version 0.19
Shape Content
In addition to detecting potential geometry errors, this tool shows a range of properties regarding the selected object:
- Checked object
- Shape type
- Number of geometric entities: vertices, edges, wires, faces, shells, solids, compsolids, compounds, total shapes
- Geometric and mass properties:
- Area
- Volume
- Mass
- Length
- Center of mass
- Orientation
- Symmetry axis
- Symmetry point
- Moments
- First axis of inertia
- Second axis of inertia
- Third axis of inertia
- Radius of gyration
- Global placement
Notes
- App Link objects linked to the appropriate object types and App Part containers with the appropriate visible objects inside can also be checked using this tool. For App Links the shape of the linked object is checked. For App Part containers the visible objects within are checked as compounds. introduced in version 0.20
- FreeCAD has no methods to automatically repair geometry. If faults are detected the steps involved to create the model need to be examined and fixed manually.
Part
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub