PartDesign Evolventenzahnrad

From FreeCAD Documentation
Revision as of 11:26, 22 January 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

PartDesign Evolventenverzahnung

Menüeintrag
Part Design → Evolventenverzahnung...
Arbeitsbereich
PartDesign
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Description

Beschreibung

Dieses Werkzeug erlaubt dir ein 2D Profil eines Evolventenzahnrades zu erstellen. Dieses 2D Profil ist vollständig parametrisch und kann mit dem Grundelement PartDesign Polster aufgefüllt werden.
Für ausführlichere Informationen siehe die Wikipedia Einträge zu: Zahnrad und Evolventenverzahnung

For more detailed information see Wikipedia's entries for: Gear and Involute Gear

Usage

Create the profile

Anwendung

  1. Gehe zum Menü Part Design → Evolventenverzahnung....
  2. Setze die Parameter für die Evolvente.
  3. Klicke auf OK.
  4. Das Evolventenzahnrad wird außerhalb des aktiven Körpers erzeugt. Ziehe und Legen es für die Anwendung von weiteren Funktionen wie z.B. Polsterung, in einen Körper.

Create a spur gear

  1. Select the gear profile in the tree.
  2. Press the PartDesign Pad button.
  3. Set the pad's DatenLength to the desired face width of the gear.
  4. Click OK

Create a helical gear

introduced in version 0.19

  1. Select the gear profile in the tree.
  2. Press the PartDesign AdditiveHelix button.
  3. Choose as Axis the normal of the gear profile, that is Normal sketch axis introduced in version 0.20. (In earlier versions the Base Z axis can be used as long as the profile's plane has not been altered.)
  4. Choose a Height-Turns mode.
  5. Set the DatenHeight to the desired face width of the gear.
  6. To set the desired helical angle an Expressions for the DatenTurns is required.
    1. Click the blue icon at the right of the input field.
    2. Enter the following formula: Height * tan(25°) / (InvoluteGear.NumberOfTeeth * InvoluteGear.Modules * pi), where 25° is an example for the desired helical angle (also known as beta-value) and InvoluteGear is the DatenName of the profile.
    3. Click OK to close the formula editor.
  7. Click OK to close the task panel.

Hint: To make the helical angle an accessible parameter, use a dynamic property:

  1. Select the profile.
  2. In the Property editor activate the Show all option in the context menu.
  3. Again in the context menu, select Add Property. Note: this entry is only available when Show all is active.
  4. In the Add Property dialog:
    1. Choose App::PropertyAngle as Type.
    2. Set Gear as Group.
    3. Set HelicalAngle as Name (without a space).
    4. Click OK
  5. Now a new property DatenHelical Angle (space added automatically), with an initial value of 0.0°, becomes available.
  6. Assign the desired helical angle to the new property.
  7. In the formula of the DatenTurns property of the AdditiveHelix, you can now reference InvoluteGear.HelicalAngle instead of the hard coded value of e.g. 25°; again assuming InvoluteGear is the DatenName of the profile.

Properties

  • Außenrad: Wahr oder Falsch
  • Hohe Präzision: Wahr oder Falsch
  • Module: Zahnabstand dividiert durch die Anzahl der Zähne.
  • Anzahl Zähne: Setzt die Anzahl der Zähne.
  • Eingriffswinkel: Winkel zwischen der Wirkungslinie und einer Normalen zu der Linie, die die Zahnradzentren verbindet. Standard ist 20 Grad. (Weitere Informationen)

Tutorials

How to make gears in FreeCAD

Verwandt