DiseñoPieza Chaflán
|
|
| Ubicación en el Menú |
|---|
| DiseñoPieza → Chaflán |
| Entornos de trabajo |
| DiseñoPieza |
| Atajo de teclado por defecto |
| Ninguno |
| Introducido en versión |
| - |
| Ver también |
| Redondeo, Pieza Chaflán |
Descripción
Esta herramienta crea chaflanes en los bordes seleccionados de un objeto. Se crea una nueva entrada separada de chaflanes (seguida de un número consecutivo si ya existen chaflanes en el documento) en el árbol del proyecto.
Utilización
- Select a single edge, multiple edges or a face on an object, then start the tool either by clicking the button
Chamfer or using the menu PartDesign → Apply a dress-up feature → Chamfer. In case you selected a face or a 3D object (introduced in version 0.20) all its edges are respected for chamfering. - In the appearing Task panel you can define the chamfer in 3 ways:
- Equal distance: The chamfer edges are equally distanced from the body edge.
- Two distances: The distances of the chamfer edge to the body edge are specified. The distance direction can be flipped. introduced in version 0.19
- Distance and angle: One distances of the chamfer edge to the body edge is specified. The second chamfer edge is defined by the angle of the chamfer. The distance direction can be flipped. introduced in version 0.19
- If you want to add more edges or faces click the Add button and select edges and/or the faces.
- After clicking the Add button you can add all edges of the object by right-clicking and selecting Add all edges from the context menu. introduced in version 0.20
- If you want to remove edges or faces
- either select the edge/face in the list of the dialog and press the DEL key. Note: Since there must be at least one edge for the feature, the last remaining edge or face in the list cannot be removed.
- or click the Remove button. All edges and faces being previously selected are highlighted in purple. Select the edge or the face to be removed.
- Click OK to validate.
- For a chain of edges tangential to one another, one single edge can be selected; the chamfer will propagate along the chain.
- To edit the chamfer after the function has been validated, either double-click on the chamfer label in the Project tree, or right-click on it and select Edit Chamfer.
Notes
DiseñoPieza Chaflán VS. Pieza Chaflán
"El DiseñoPiezas chaflán no debe confundirse con su Ambiente de trabajo piezas contraparte". Aunque comparten el mismo icono, no son lo mismo, y no se usan de la misma manera. La principal diferencia es que DiseñoPiezas Chaflán crea una entrada de chaflán separada (seguida de un número secuencial si ya existen chaflanes) en el árbol de proyecto para el cuerpo actual. El Piezas chaflán se convierte en el padre del objeto al que se aplicó.
PartDesign
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Edit sketch, Map sketch to face
- Modeling tools
- Datum tools: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a sub-object(s) shape binder, Create a clone
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Boolean: Boolean operation
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub