PartDesign AdditiveWedge/tr

From FreeCAD Documentation
Revision as of 08:26, 3 September 2021 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

PartDesign AdditiveWedge

Menu location
Part Design → Create an additive primitive → Additive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign Create an additive primitive, PartDesign Subtractive Wedge

Tanım

Inserts a primitive wedge in the active Body as the first feature, or fuses it to the existing feature(s).

Usage

  1. Press the Additive Wedge button. Note: the Additive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Additive Wedge in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Wedge feature appears under the active Body.

Options

The Wedge can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

Using the default placement, the below inputs are:

  • VeriX min/max : Base face X axis span
  • VeriY min/max: Wedge height span
  • VeriZ min/max : Base face Z axis span
  • VeriX2 min/max : Top face X axis span
  • VeriZ2 min/max : Top face Z axis span

Pyramids

Wedges can be used to create pyramids by setting VeriX2 min/max and VeriZ2 min/max each so that min = max.