Siatka: Utwórz bryłę pierwotną
Mesh BuildRegularSolid |
Menu location |
---|
Meshes → Regular solid... |
Workbenches |
Mesh |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Mesh BuildRegularSolid command creates a regular parametric solid mesh object.
Usage
- There are several ways to invoke the command:
- Press the Mesh BuildRegularSolid button.
- Select the Meshes → Regular solid... option from the menu.
- The Regular Solid dialog box opens.
- First select a mesh object type from the dropdown list:
- Specify the required settings. The available settings depend on the mesh object type. See Properties.
- For meshes with curved surfaces: a higher Sampling value results in a finer mesh.
- Press the Create button to create the mesh object.
- Optionally create more mesh objects.
- Press the Close button to close the dialog box and finish the command.
Notes
- Mesh objects created with this command are parametric. Whenever they are recomputed, for example after changing one of their parameters, their mesh is reconstructed. This means that manipulating them with commands such as Mesh RemeshGmsh, Mesh Scale etc. usually does not make sense.
Properties
Mesh objects created with this command inherit all Mesh Feature properties. In addition each mesh object type has a number of properties to control its parametric behavior:
Cube
Data
Cube
- DANEHeight (
FloatConstraint
): the height of the cube. - DANELength (
FloatConstraint
): the length of the cube. - DANEWidth (
FloatConstraint
): the width of the cube.
Cylinder
Data
Base
- DANEClosed (
Bool
): if set tofalse
, the planar ends of the cylinder are left open. - DANEEdge Length (
FloatConstraint
): the edge length of the faces in the mesh. - DANELength (
FloatConstraint
): the length of the cylinder. - DANERadius (
FloatConstraint
): the radius of the cylinder. - DANESampling (
IntegerConstraint
): the number of faces along the curved surface.
Cone
Data
Base
- DANEClosed (
Bool
): if set tofalse
, the planar end(s) of the cone are left open. - DANEEdge Length (
FloatConstraint
): the edge length of the faces in the mesh. - DANELength (
FloatConstraint
): the length of the cone. - DANERadius 1 (
FloatConstraint
): the first radius of the cone. Can be0
. - DANERadius 2 (
FloatConstraint
): the second radius of the cone. Can be0
. - DANESampling (
IntegerConstraint
): the number of faces along the curved surface.
Sphere
Data
Base
- DANERadius (
FloatConstraint
): the radius of the sphere. - DANESampling (
IntegerConstraint
): the number of faces along both directions of the curved surface.
Ellipsoid
Data
Base
- DANERadius 1 (
FloatConstraint
): the first radius of the ellipsoid. - DANERadius 2 (
FloatConstraint
): the second radius of the ellipsoid. - DANESampling (
IntegerConstraint
): the number of faces along both directions of the curved surface.
Torus
Data
Base
- DANERadius 1 (
FloatConstraint
): the first (main) radius the torus. - DANERadius 2 (
FloatConstraint
): the second radius of the torus. - DANESampling (
IntegerConstraint
): the number of faces along both directions of the curved surface.
Środowisko pracy Siatka
- Różności: Import siatki, Eksport siatki, Siatka z kształtu, Utwórz bryłę regularną, Rozwiń siatkę, Rozwiń powierzchnię
- Modyfikacja: Ujednolicenie wektorów normalnych, Odwróć wektory normalne, Wypełnij otworów, Wypełnij interaktywnie otwory, Dodaj element, Usuń elementy, Usuń interaktywnie elementy, Wygładzanie, Uprość przez Gmsh, Uprość, Skala
- Logiczne: Połączenie, Przecięcie, Różnica
- Krojenie: Przetnij, Przytnij, Przytnij siatkę płaszczyzną, Przekrój płaszczyzną, Wiele przekrojów
- Części składowe i segmenty: Scal, Rozbij na komponenty, Utwórz segment siatki, Tworzenie segmentów siatki z najlepiej dopasowanych powierzchni
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web