Macro FCInfo Alternate Linux

From FreeCAD Documentation
Revision as of 11:46, 30 September 2017 by Mario52 (talk | contribs)

File:FCInfo Macro FCInfo Alternate Linux

Popis
Gives a series of information on the form.

Version macro : 1.12
Date last modification : 2014-03-05
Autor: Mario52
Autor
Mario52
Download
None
Odkazy
Verze
1.12
Datum poslední úpravy
2014-03-05
Verze FreeCAD
None
Výchozí zástupce
None
Viz též
None


Gives a series of informations about the selected shape and can display a conversion of length, inclination (degrees, radians, grades, pourcent) shape, surface, volume and the weight of the form in the density selected in different units of quantities international and Anglo-Saxon.


The server does not accept for the moment of the more pages of 64 KB and it was impossible to update and restore this page to me.

Download the file here :

FCInfo_en_Ver_1-12_No_Docked_Ubuntu.FCMacro.zip

Or on the forum

The difference between the regular version and the version "Ubuntu" in another type of encoding of the characters above + 128 with the procedure
PS: this version is derived from the original version, the difference is located at the level of encoding ² ³ ° µ characters that can cause the error "ordinal not in range (128)" on some configurations ?

Example :

global uniteSs       ; uniteSs       = u"mm²"
global uniteVs       ; uniteVs       = u"mm³"
global uniteAs       ; uniteAs       = u"°"

replace to :

global uniteSs       ; uniteSs       = "mm"+iso8859(unichr(178))
global uniteVs       ; uniteVs       = "mm"+iso8859(unichr(179))
global uniteAs       ; uniteAs       = iso8859(unichr(176))

Files saved with this macro are incompatible with the files of the other versions.

Both versions can operate independently of the OS used.