Başlangıç

From FreeCAD Documentation
Revision as of 22:16, 20 December 2018 by Skywalker21 (talk | contribs)


Yenilikler

Önsöz

FreeCad, bir 3D CAD/CAE parametrik modelleme uygulamasıdır. Öncelikle mekanik tasarım için üretilmiş olup, aynı zamanda hassasiyet isteyen 3D modelleme ile model kayıtları üzerinde ayarlama gerektiren tüm alanlarda kullanılabilir.

FreeCAD geliştirme süreci devam etmekte olup, şu anda bir çok özellik barındırmaktadır. Özellikle ücretli emsalleriyle karşılaştırıldığında halen yeterli araçlara sahip olmamasına karşın, hobi alanında ve küçük atölyelerde ihtiyaçları karşılayabilecek yetenektedir. Hızla büyüyen, gönüllü kullanıcıların bulunduğu FreeCAD forum'a katılarak, FreeCAD'le hazırlanmış birçok kaliteli projeyi inceleyebilirsiniz.

Tüm açık kaynak kodlu projelerde olduğu gibi, FreeCAD projesi de geliştiriciler tarafından size sunulan tek yönlü bir çalışma değildir. Gelişmesi, yeni özellikler kazanması ve kararlı(hataların düzeltilmesi) hale gelmesi kullanıcı topluluğuna bağlıdır. FreeCAD kullanırken unutmayın; eğer FreeCAD kullanmak hoşunuza gittiyse, sizde FreeCAD'in geliştirilmesine katkı sağlayabilir ve FreeCAD'e yardım edebilirsiniz!

Yükleme

Her şeyden önce, FreeCAD'i indirin ve kurun. Güncel sürüm ve güncellemeler hakkında bilgi almak için İndirme sayfasını ve Yükleme talimatları için Yükleme sayfasını ziyaret ediniz.Windows(.msi), Debian ve Ubuntu(.deb), openSUSE(.rpm) ve Mac OSX işletim sistemlerine yönelik Yükleme dosyaları mevcuttur. FreeCAD, diğer birçok Linux dağıtımında paket yöneticilerinden ulaşılabilir. Ayrıca güncel 64-bit Linux sistemlerde tek başına çalıştırılabilir AppImage da bulunmaktadır. FreeCAD açık kaynak kodlu olduğu için, kaynak kodunu indirip, kendiniz de derleyebilirsiniz.

FreeCAD'i Keşfedin

File:Freecad-interface.jpg


  1. 3D görünüm alanı, belge içeriğini gösterir.
  2. Ağaç görünüm alanı, belge içeriğindeki tüm nesnelerin hiyerarşisini ve yapım aşamalarını gösterir.
  3. Özellik editörü, seçilen nesnenin özellikleri görüntülenebilir veya değişiklikler yapılabilir.
  4. Rapor görünüm alanı (veya çıktı penceresi), FreeCAD'e ait mesajlar,uyarılar ve hata mesajları görüntülenir.
  5. The Python konsolu(komut satırı), FreeCAD tarafından çalıştırılan tüm komutlar görüntülenir ve Python kodu yazılabilir.
  6. The tezgah seçici, aktif tezgahın seçildiği yer.


FreeCAD arayüzünün arkasındaki anlayış, onun çalışma tezgahlarına ayrılmasıdır.Bir çalışma tezgahı, Mesh çizimi veya 2D nesnelerin çizimi veya limitli taslaklar gibi belirli işler için uygun araçlardan oluşan koleksiyondur.Aktif çalışma tezgahı, Tezgah seçiciden değiştirilebilir(6).Her tezgah içerisinde bulunan araçlar, diğer tezgahlardan ve makro olarak adlandırılan kullanıcı tarafından oluşturulan araçlar da eklenerek zelleştirilebilir.Parça dizaynı tezgahı ve Parça tezgahı, yaygın olarak kullanılan, çalışma başlangıç noktalarıdır.

FreeCAD ilk çalıştırıldığında, karşılama ekranı olarak başlangıç merkezi açılır.Sürüm 0.16 'ya ait karşılama ekranı görüntüdeki gibidir.


FreeCAD 0.17 karşılama ekranı için başlangıç merkezi ekran görüntüsüne bakın.

Başlangıç Merkezi ile yaygın olarak kullanılan tezgahları kolayca seçebilir, son kullanılan dosyaları açabilir veya FreeCAD dünyasından en son haberleri görebilirsiniz. Varsayılan çalışma tezgahını tercih ayarlarından değiştirebilirsiniz.

3D alanında gezinme

FreeCAD'in, farenizi, 3D görünümdeki nesnelerle ve görünümün kendisi ile etkileşimde bulunma şeklini değiştiren çeşitli gezinme yöntemi vardır. Bunlardan biri özellikle fare orta tuşunun kullanılmadığı dokunmatik yüzeyler için üretilmiştir. Aşağıdaki tabloda, CAD Gezinme adı verilen, varsayılan mod açıklanmaktadır (3D görünümün boş bir alanına sağ tıklayarak mevcut gezinme modunu hızlı bir şekilde değiştirebilirsiniz):


Seçme Taşıma Zumlamak Görünümü döndür
Birinci yöntem
Görünümü döndür
Alternatif yöntem
Seçmek istediğiniz nesne üzerinde sol fare tuşuna basın.

Ctrl tuşunu basılı tutmak birden fazla nesnenin seçimini sağlar.

Fare orta tuşunu basılı tutun ve fareyi hareket ettirin. Nesneyi büyütmek/küçültmek için fare tekerleğini kullanın.

Fare orta tuşuna tıklamak, nesneyi imlecin bulunduğu konuma getirir..

Fare orta tuşunu basılı tutun, fare sol tuşuna basın ve tutun, fareyi hareket ettirin.

Orta fare düğmesine basıldığında imleç konumu, dönme merkezini belirler. Dönme, merkezinin etrafında dönen bir topun dönmesi gibi çalışır. Tuşlar, fare hareketini durdurmadan önce serbest bırakılırsa, görünüm dönmeye devam eder .

Farenin orta düğmesiyle çift tıklandığında yeni bir dönüş merkezi belirlenir.

Fare orta tuşunu basılı tutun, sonra fare sağ tuşunu basılı tutun, fareyi hareket ettirin.

Bu yöntemle farenin sağ tuşu basılı tutulduktan sonra, orta fare tuşu serbest bırakılabilir.

Fareyi sağ elleriyle kullanan kullanıcılar, bu yöntemi ilk yöntemden daha kolay bulabilirler.

Ctrl+ Ctrl+Shift+ Shift+
Pan mode: Ctrl tuşunu basılı tutun, fare sağ tuşunu tıklayın, fareyi hareket ettirin. introduced in version 0.17 Zoom mode: Ctrl ve Shift tuşlarını basılı tutun, fare sağ tuşuna tıklayın, fareyi hareket ettirin. introduced in version 0.17 Rotate mode:Shift tuşunu basılı tutun, fare sağ tuşunu tıklayın, fareyi hareket ettirin. introduced in version 0.17


You also have several view presets (top view, front view, etc) available in the View menu, on the View toolbar, and by numeric shortcuts (1, 2, etc...). By right-clicking on an object or on an empty area of the 3D view, you have quick access to some common operations, such as setting a particular view, or locating an object in the Tree view.

FreeCAD'le İlk Adımlar

FreeCAD's focus is to allow you to make high-precision 3D models, to keep tight control over those models (being able to go back into modelling history and change parameters), and eventually to build those models (via 3D printing, CNC machining or even construction worksite). It is therefore very different from some other 3D applications made for other purposes, such as animation film or gaming. Its learning curve can be steep, especially if this is your first contact with 3D modeling. If you are struck at some point, don't forget that the friendly community of users on the FreeCAD forum might be able to get you out in no time.

The workbench you will start using in FreeCAD depends on the type of job you need to do: If you are going to work on mechanical models, or more generally any small-scale objects, you'll probably want to try the PartDesign Workbench. If you will work in 2D, then switch to the Draft Workbench, or the Sketcher Workbench if you need constraints. If you want to do BIM, launch the Arch Workbench. If you are working with ship design, there is a special Ship Workbench for you. And if you come from the OpenSCAD world, try the OpenSCAD Workbench.

You can switch workbenches at any time, and also customize your favorite workbench to add tools from other workbenches.

Working with the PartDesign and Sketcher workbenches

The PartDesign Workbench is specially made to build complex objects, starting from simple shapes, and adding or removing pieces (that we call "features"), until you get to your final object. All the features you applied during the modelling process are stored in a separate view called the tree view, which also contains the other objects in your document. You can think of a PartDesign object as a succession of operations, each one applied to the result of the preceding one, forming one big chain. In the tree view, you see your final object, but you can expand it and retrieve all preceding states, and change any of their parameter, which automatically updates the final object.

The PartDesign workbench makes heavy use of another workbench, the Sketcher Workbench. The sketcher allows you to draw 2D shapes, which are defined by applying Constraints to the 2D shape. For example, you might draw a rectangle and set the size of a side by applying a length constraint to one of the sides. That side then cannot be resized anymore (unless the constraint is changed).

Those 2D shapes made with the sketcher are used a lot in the PartDesign workbench, for example to create 3D volumes, or to draw areas on the faces of your object that will then be hollowed from its main volume. This is a typical PartDesign workflow:

  1. Create a new sketch
  2. Draw a closed shape (make sure all points are joined)
  3. Close the sketch
  4. Expand the sketch into a 3D solid by using the pad tool
  5. Select one face of the solid
  6. Create a second sketch (this time it will be drawn on the selected face)
  7. Draw a closed shape
  8. Close the sketch
  9. Create a pocket from the second sketch, on the first object

Which gives you an object like this:

At any moment, you can select the original sketches and modify them, or change the extrusion parameters of the pad or pocket operations, which will update the final object.

Working with the Draft and Arch workbenches

The Draft Workbench and Arch Workbench behave a bit differently than the other workbenches above, although they follow the same rules, which are common to all of FreeCAD. In short, while the Sketcher and PartDesign are made primarily to design single pieces, Draft and Arch are made to ease your work when working with several, simpler objects.

The Draft Workbench offers you 2D tools somewhat similar to what you can find in traditional 2D CAD applications such as AutoCAD. However, 2D drafting being far away from the scope of FreeCAD, don't expect to find there the full array of tools that these dedicated applications offer. Most of the Draft tools work not only in a 2D plane but also in the full 3D space, and benefit from special helper systems such as Work planes and object snapping.

The Arch Workbench adds BIM tools to FreeCAD, allowing you to build architectural models with parametric objects. The Arch workbench relies extensively on other modules such as Draft and Sketcher. All the Draft tools are also present in the Arch workbench, and most Arch tools make use of the Draft helper systems.

A typical workflow with Arch and Draft workbenches might be:

  1. Draw a couple of lines with the Draft Line tool
  2. Select each line and press the Wall tool to build a wall on each of them
  3. Join the walls by selecting them and pressing the Arch Add tool
  4. Create a floor object, and move your walls in it from the Tree view
  5. Create a building object, and move your floor in it from the Tree view
  6. Create a window by clicking the Window tool, select a preset in its panel, then click on a face of a wall
  7. Add dimensions by first setting the working plane if necessary, then using the Draft Dimension tool

Which will give you this:

More on the Tutorials page.

Scripting

And finally, one of the most powerful features of FreeCAD is the scripting environment. From the integrated python console (or from any other external Python script), you can gain access to almost any part of FreeCAD, create or modify geometry, modify the representation of those objects in the 3D scene or access and modify the FreeCAD interface. Python scripting can also be used in macros, which provide an easy method to create custom commands.


Install on Mac/tr
Mouse Model/tr