Fasteners Workbench

From FreeCAD Documentation
Revision as of 11:12, 31 December 2021 by Roy 043 (talk | contribs)
Fasteners Workbench icon

Introduction

The Fasteners Workbench is an external workbench that can add various fasteners to parts.

The default two toolbar layout of the workbench.
Fasteners with metric dimensions have orange icons.
Fasteners with inch dimensions have green icons.

Installation

  1. Install the Fasteners Workbench via the Addon Manager. For manual installation see Installing more workbenches.
  2. Restart FreeCAD.
  3. Create a new document.
  4. Select the Fasteners Workbench from the Workbench dropdown list.
  5. The default two toolbar layout will display.
  6. The FS Screws toolbar in this layout contains many fasteners. To see all available buttons use the >> button to expand it.
  7. Optionally change the toolbar and menu layout:
    1. Go to: Edit → Preferences... → Fasteners → General settings → Toolbar screw icons grouping.
    2. Select one of the available options:
      • None: All fasteners appear in a single toolbar. This is the default layout.
      • Separate toolbars: Fasteners are grouped in several toolbars.
      • Dropdown buttons: Fasteners are grouped in toolbars with flyouts.
    3. Restart FreeCAD.

Usage

Fasteners can be attached or unattached. Attached fasteners have a Database Object, a circular edge, and their DataPlacement is dynamically linked to that object. The Fasteners Move command can be used to attach or detach a fastener.

Unattached fasteners

  1. Select the desired fastener by clicking its button or by picking it from the menu.
  2. A fastener is created at the origin.
  3. Optionally change the dimensions and other properties of the fastener:
    1. Select the fastener.
    2. Go to the Data tab of the Property editor.
    3. Change the required properties.

Attached fasteners

On the left two selected circular edges. On the right the attached fasteners.

  1. Specify if the selected holes are tap holes or pass holes by selecting Fasteners MatchTypeInner or Fasteners MatchTypeOuter respectively (not used for countersunk screws).
  2. Select one or more circular edges and/or faces with circular edges. For countersunk screws the top edge of the chamfered hole must be selected.
  3. Select the desired fastener by clicking its button or by picking it from the menu.
  4. A fastener is attached to each of the selected circular edges.
  5. The default dimensions of each fastener depend on the radius of the circular edge it is attached to. Countersunk screws are matched by their head diameter, other fasteners are matched by their shaft diameter.
  6. Optionally change the dimensions and other properties of the fasteners. See above.
  7. Fasteners that appear upside-down can be inverted with the Fasteners Flip command or by changing their Datainvert property.
  8. Optionally change the Dataoffset property to create space between the fasteners and the edges they are attached to.

Notes

  • To generate threads, the Datathread property of a fastener must be changed to true. Generating threads is costly. Recomputes take much longer if there are many fasteners with threads in a document.
  • The Datainvert property and the Dataoffset property are ignored for unattached fasteners.

Commands

  • Move fastener: Move and attach a fastener to a circular edge. Can also be used to detach a fastener.
  • Generate BOM: Create a spreadsheet with a bill of materials for the fasteners in the document.

Fasteners

Fasteners with metric dimensions have orange icons. Fasteners with inch dimensions have green icons.

Self-clinching and PCB fasteners

  • Self-clinching nut.
  • Self-clinching standoff.
  • Self-clinching stud.
  • PCB standoff Female/Male.
  • PCB spacer Female/Female.
  • Heat staked insert.

Hexagon head screws and bolts

  • ISO 4017 Hexagon head screw. Product grades A and B.
  • ISO 4014 Hexagon head bolt. Product grades A and B.
  • EN 1662 Hexagon head bolt with flange, small series.
  • EN 1665 Hexagon head bolt with flange, heavy series.
  • ASME B18.2.1.6 UNC Hexagon head screw.
  • ASME B18.2.1.8 UNC Hexagon head screw with flange.

Hexagon socket screws

  • ISO 4762 Hexagon socket head cap screw.
  • DIN 7984 Hexagon socket head cap screw with low head.
  • DIN 6912 Hexagon socket head cap screw with low head with center.
  • ISO 7380-1 Hexagon socket button head screw.
  • ISO 7380-2 Hexagon socket button head screw with flange.
  • ISO 10642 Hexagon socket countersunk head screw.
  • ISO 7379 Hexagon socket head shoulder screw.
  • ISO 4026 Hexagon socket set screw with flat point.
  • ISO 4027 Hexagon socket set screw with cone point.
  • ISO 4028 Hexagon socket set screw with dog point.
  • ISO 4029 Hexagon socket set screw with cup point.
  • ASME B18.3.1A UNC Hexagon socket head cap screw.
  • ASME B18.3.2 UNC Hexagon socket countersunk head screw.
  • ASME B18.3.3A UNC Hexagon socket button head screw.
  • ASME B18.3.3B UNC Hexagon socket button head screw with flange.
  • ASME B18.3.4 UNC Hexagon socket head shoulder screw.
  • ASME B18.3.5A UNC Hexagon socket set screw with flat point.
  • ASME B18.3.5B UNC Hexagon socket set screw with cone point.
  • ASME B18.3.5C UNC Hexagon socket set screw with dog point.
  • ASME B18.3.5D UNC Hexagon socket set screw with cup point.

Slotted head screws

  • ISO 2009 Slotted countersunk flat head screw. Product grade A.
  • ISO 2010 Slotted raised countersunk head screw. Product grade A.
  • ISO 1580 Slotted pan head screw. Product grade A.
  • ISO 1207 Slotted cheese head screw. Product grade A.
  • ASME B18.6.3.1A UNC slotted countersunk flat head screw.

H cross head screws

  • DIN 967 Pan head screw with collar with type H cross recess.
  • ISO 7045 Pan head screw with type H cross recess. Product grade A.
  • ISO 7046 Countersunk flat head screw with type H cross recess. Product grade A.
  • ISO 7047 Raised countersunk head screw with type H cross recess. Product grade A.
  • ISO 7048 Cheese head screw with type H cross recess.

Hexalobular socket head screws

  • ISO 14579 Hexalobular socket head cap screw.
  • ISO 14580 Hexalobular socket cheese head screw.
  • ISO 14582 Hexalobular socket countersunk head screw, high head.
  • ISO 14583 Hexalobular socket pan head screw.
  • ISO 14584 Hexalobular socket raised countersunk head screw.

Other head bolts

  • ASME B18.5 UNC Round head square neck bolt.

Washers

  • ISO 7089 Plain washer, normal series. Product grade A.
  • ISO 7090 Plain washer chamfered, normal series. Product grade A.
  • ISO 7092 Plain washer, small series.
  • ISO 7093-1 Plain washer, large series. Product grade A.
  • ISO 7094 Plain washer, extra large series.
  • ASME B18.21.1.12A UN washer, narrow series.
  • ASME B18.21.1.12B UN washer, regular series.
  • ASME B18.21.1.12C UN washer, wide series.

Nuts

  • ISO 4032 Hexagon nut, style 1. Product grades A and B.
  • ISO 4033 Hexagon nut, style 2. Product grades A and B.
  • ISO 4035 Hexagon thin nut, chamfered. Product grades A and B.
  • EN 1661 Hexagon nut with flange.
  • DIN 557 Square nut.
  • DIN 562 Square nut.
  • DIN 985 Nyloc nut.
  • ASME B18.2.2.1A UNC Machine screw nut.
  • ASME B18.2.2.4A UNC Hexagon nut.
  • ASME B18.2.2.4B UNC Hexagon thin nut.

Miscellaneous

  • Arbitrary length threaded rod for tapping holes.
  • Arbitrary length threaded rod for tapping holes.
  • Arbitrary length threaded tube for cutting external threads.
  • Arbitrary length threaded tube for cutting external threads.
  • Arbitrary length DIN 975 threaded rod.
  • Arbitrary length UNC threaded rod.

References

Links