FEM ConstraintContact

From FreeCAD Documentation
Revision as of 08:09, 14 October 2019 by Berndhahnebach (talk | contribs)

FEM ConstraintContact

Menu location
Model → Mechanical Constraints → Constraint contact
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Description

Creates a FEM constraint for contact between 2 surfaces.

How to use

  1. Click on or choose ModelMechanical Constraints Constraint contact from the top menu.
  2. Select the master face.
  3. Select the slave face.
  4. Enter a contact stiffness.
  5. Enter a friction coefficient.

Limitations

  1. The contact constraint can only be applied to two faces.

Notes

Some tipps how to model?

  • from https://forum.freecadweb.org/viewtopic.php?f=18&p=340874#p340494
  • Better use linear elements otherwise calculations are very time consuming
  • master/slave assignment:
    • The larger of the two surfaces should act as the master surface.
    • If the surfaces are of comparable size, the surface on the stiffer body should act as the master surface.
    • If the surfaces are of comparable size and stiffness, the surface with the coarser mesh should act as the master surface.


CalculiX