Draft: Draft2Sketch

From FreeCAD Documentation
Revision as of 15:40, 12 December 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft Draft2Sketch

Menu location
Drafting → Draft to Sketch
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None

Description

Descriere

Acest instrument convertește Draft objects la Sketcher objects și invers.

Usage

Cum se utilizează

  1. Selectați un obiect Draft sau Sketch
  2. Apăsați butonul 16px Draft Draft2Sketch

Notes:

  • If you convert a Draft Wire, the resulting sketch will use point constraints for the nodes.
  • If you convert a Draft Rectangle, the resulting sketch will use point constraints for the corners, and horizontal and vertical constraints for the edges.
  • If you convert a Draft BezCurve, the resulting sketch will be approximated by a Sketcher BSpline, as the Sketcher Workbench doesn't support Bezier curves currently.
  • Non-Draft objects that are totally planar will also get converted to sketches.

Limitations

The conversion of an object that cannot be represented with a combination of straight lines, circular arcs, and B-Splines will usually fail, that is, the item will not appear in the sketch.

In the past, a Draft BSpline couldn't be converted directly to a sketch. A tool to perform this conversion was developed for the KicadStepUp Workbench, which would take a Draft BSpline and convert it into a series of Sketcher Arcs. See the forum thread BSplines to Shape2DView and Sketcher for more information.

As of version 0.17 and above the conversion from Draft BSpline to Sketcher BSpline is possible. However, converting a spline to a series of arcs may still be useful for exporting geometry to applications that don't support B-Splines, like KiCad.

Opțiuni

  • Dacă convertiți un Draft Wire, vor fi aplicate constrângeri de punct la noduri
  • Dacă convertiți un Draft Rectangle, vor fi aplicate constrângeri punctuale la colțuri, iar constrângerile orizontale și verticale pentru marginile
  • Non-Draft obiecte care sunt complet planare vor fi, de asemenea, convertite în schițe

There are no options for this tool. Either it works with the selected object or not.

Script-Programare

Nu este disponibil, consultați documentația Module Sketcher pentru a crea schițe prin script-programare

Internally the Draft2Sketch tool uses two methods to convert back and forth from Draft to Sketch.

Convert objects to Sketch:

Draft.makeSketch(objectslist, autoconstraints=False, addTo=None, delete=False, name="Sketch", radiusPrecision=-1)

Convert objects to Draft:

Draft.draftify(objectslist, makeblock=False, delete=True)