Draftː Aggiungi al gruppo Costruzione

From FreeCAD Documentation
Revision as of 19:40, 3 September 2021 by Heda (talk | contribs)

Aggiungi al gruppo Costruzione

Posizione nel menu
Draft → Utilità → Aggiungi al gruppo Costruzione
Ambiente
Draft, Arch
Avvio veloce
Nessuno
Introdotto nella versione
0.17
Vedere anche
Modalità costruzione, Aggiungi al gruppo

Descrizione

Questo comando aggiunge gli oggetti selezionati al Gruppo costruzione.

Bug in version 0.19

In FreeCAD version 0.19 this command and the Draft ToggleConstructionMode command will typically use different groups. To avoid this change the Construction group name in the preferences to Draft_Construction: Edit → Preferences... → Draft → General settings → Construction Geometry → Construction group name. In version 0.20 the Construction group name is used for the label of the construction group, the name of the group is always Draft_Construction.

Utilizzo

  1. Selezionare gli oggetti che si desidera spostare nel gruppo Costruzione.
  2. Andare nel menu Draft → Utilità → Aggiungi al gruppo costruzione.

Notes

È anche possibile aggiungere oggetti usando Aggiungi al gruppo a un: