Krzywe: Narzędzie zebra
Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.
Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.
Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.
Curves ZebraTool |
Menu location |
---|
Surfaces → Zebra Tool |
Workbenches |
Curves |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Curves ZebraTool creates a Zebra texture for surface inspection. This tool is part of the external workbench called Curves.
Usage
- Switch to the Curves workbench (install from Addon Manager is necessary, if not previously installed)
- Select the surface to be tested
- To invoke the command, do one of the following:
- Press the Zebra texture for surface inspection button in the tool bar.
- Use the Surfaces → Zebra Tool
- Change the Zebra Tool parameter to the required conditions
Properties
- DANEBlack Stripes Width: Change the black stripes width.
- DANEScale: Scale the Zebra stripes.
- DANERotation: Rotate the Zebra stripes.
Notes
- Click on the Quit button to exit the Zebra Tool.
Limitations
Scripting
Środowisko pracy Krzywe
- Krzywa ISO, Połącz krzywe, Grzebień parametryczny, Bryła parametryczna, .................
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web